RS Components
Vår webbplats använder cookies och liknande teknik för att ge bättre service vid sökning och vid beställning, för analytiska ändamål och för att kunna anpassa vår marknadsföring till dig.
 
Sök efter P/N

Bridgetek FT900L-T, 32bit FT32 Microcontroller, Embedded Microcontroller, 100MHz, 256 kB Flash, Shadow, 100-Pin LQFP


Denna produkt har utgått
RS-artikelnummer:
901-5001
Tillv. art.nr:
FT900L-T
Tillverkare / varumärke:
Bridgetek
COO (Country of Origin):
TW

FT900/901/902/903 32-Bit Microcontrollers


The FT90x series of 32-bit RISC-core microcontrollers provides an extensive range of connectivity options, making it the ideal choice for advanced technology 'bridging' applications. Programs execute in zero wait-state RAM yielding 310DMIPS performance from a 100MHz clock. On power-up, program code is automatically transferred from non-volatile Flash memory to shadow RAM where it executes resulting in 3.1DMIPS/MHz performance.


100MHz 32-bit RISC architecture with 3.1DMIPS/MHz performance
256KB Flash + 256KB shadow RAM memory
64KB data SRAM
32.768kHz RTC clock support
4 x User Timers
8-bit parallel camera interface
USB2.0 Hi-Speed (480Mbps) device controller with Battery Charge Detection (BCD)
USB2.0 Hi-Speed (480Mbps) EHCI host controller with BCD emulation
10/100Base-TX Ethernet MAC with MII interface compliant with IEEE 802.3/802.3u (FT900/901 only)
2 x CAN 2.0 controllers for data transfer up to 1Mbit/s (FT900/902 only)
I²S master/slave interface (24.57/22.57MHz)
2 x SPI slaves support single data transfer with 25MHz clock
SPI master supports single/dual/quad modes of data transfer with up to 25MHz clock
UART interface configured as 1 x full UART or 2 x basic UARTs (TX/RX/CTS/RTS)
2 x I²C bus interfaces can be configured as master or slave, up to 3.4Mbps
7 x PWM channel outputs with support for PCM 8/16-bit stereo audio output
7 x analogue input channels to 10-bit ADC @ 960KSPS
2 x 10-bit DACs @ 1MSPS
SD V3.0 host controller supports up to 25MHz SD clock and software supports SD card format in SD/SDHC/SDXC
USB DFU Bootloader
Power supply: +3.0V to +3.6Vdc
Operating temperature range: -40 to +85°C

RS Product Codes
901-5001 FT900L LQFP100
901-5004 FT900Q QFN100
901-5008 FT901L LQFP100
901-5017 FT901Q QFN100
901-5010 FT902L LQFP100
901-5014 FT902Q QFN100
901-5023 FT903L LQFP100
901-5026 FT903Q QFN100


AttributeValue
Family NameEmbedded Microcontroller
Package TypeLQFP
Mounting TypeSurface Mount
Pin Count100
Device CoreFT32
Data Bus Width32bit
Program Memory Size256 kB
Maximum Frequency100MHz
RAM Size64 kB, 256 kB
USB Channels1 x Host, 1 x Peripheral Controller
Number of PWM Units1
ADC Channels7
Typical Operating Supply Voltage3.3 V
Program Memory TypeFlash, Shadow
Number of Timers4
Number of ADC Units1
Width14mm
Data Rate1Mbps
Pulse Width Modulation1 (7 x 8 / 16 bit)
Instruction Set ArchitectureRISC
Dimensions14 x 14 x 1.45mm
Timers4 x 16 bit
PWM Channels7
Height1.45mm
Timer Resolution16bit
ADCs1 (7 x 10 bit)
Length14mm
Maximum Operating Temperature+85 °C
ADC Resolution10bit
Maximum Number of Ethernet Channels1
Minimum Operating Temperature-40 °C
PWM Resolution8 bit, 16 bit