Microchip PIC, PIC18 Microcontroller MCU, 28-Pin SPDIP
- RS-artikelnummer:
- 264-8051
- Tillv. art.nr:
- PIC18F2410-I/SP
- Tillverkare / varumärke:
- Microchip
Antal (1 rör med 15 enheter)*
802,365 kr
(exkl. moms)
1 002,96 kr
(inkl. moms)
Lagerinformation är för närvarande otillgänglig
Enheter | Per enhet | Per Rør* |
|---|---|---|
| 15 + | 53,491 kr | 802,37 kr |
*vägledande pris
- RS-artikelnummer:
- 264-8051
- Tillv. art.nr:
- PIC18F2410-I/SP
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Family Name | PIC18 | |
| Package Type | SPDIP | |
| Mounting Type | Through Hole | |
| Pin Count | 28 | |
| Device Core | PIC | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Family Name PIC18 | ||
Package Type SPDIP | ||
Mounting Type Through Hole | ||
Pin Count 28 | ||
Device Core PIC | ||
The Microchip PIC series 8bit MCU with nanoWatt technology has 16 KB flash memory, 768B RAM, 25 I/O ports and 28 pins. It has 40MHz DC operating frequency and operating temperature ranging between -40°C to +85°C (Industrial).
Up to 10 MIPS performance
C compiler optimized RISC architecture
8 x 8 single cycle hardware multiply
Internal oscillator support 31 kHz to 8 MHz
Fail-safe clock monitor – allows safe shutdown if clock fails
Watchdog Timer with separate RC oscillator
Wide operating Voltage range between 2.0V to 5.5V
Run, Idle and Sleep modes
Idle mode currents down to 5.8uA typical
Sleep mode currents down to 0.1uA typical
10-bit ADC, 10 channels, 100K samples per second
Programmable Low Voltage Detection Module
Programmable Brown-out Reset module
Two Analog comparators with input multiplexing
C compiler optimized RISC architecture
8 x 8 single cycle hardware multiply
Internal oscillator support 31 kHz to 8 MHz
Fail-safe clock monitor – allows safe shutdown if clock fails
Watchdog Timer with separate RC oscillator
Wide operating Voltage range between 2.0V to 5.5V
Run, Idle and Sleep modes
Idle mode currents down to 5.8uA typical
Sleep mode currents down to 0.1uA typical
10-bit ADC, 10 channels, 100K samples per second
Programmable Low Voltage Detection Module
Programmable Brown-out Reset module
Two Analog comparators with input multiplexing