Microchip, 8 bit AVR, AVR ATtiny Microcontroller, 20 MHz, 1kB FLASH, 8-Pin SOIC

Antal (1 rör med 95 enheter)*

1 408,28 kr

(exkl. moms)

1 760,35 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 190 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per Rør*
95 +14,824 kr1 408,28 kr

*vägledande pris

RS-artikelnummer:
236-8841
Tillv. art.nr:
ATTINY13-20SQ
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Product Type

Microcontroller

Series

AVR ATtiny

Package Type

SOIC

Mount Type

Surface

Pin Count

8

Device Core

AVR

Data Bus Width

8bit

Interface Type

SPI

Program Memory Size

1kB

Maximum Clock Frequency

20MHz

Maximum Supply Voltage

5.5V

DACs

8 Bit

Number of Programmable I/Os

6

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

105°C

Standards/Approvals

REACH, RoHS3

Minimum Supply Voltage

2.7V

Program Memory Type

FLASH

Instruction Set Architecture

RISC

Automotive Standard

No

ADCs

4 x 10 Bit

Number of Timers

1

The Microchip ATtiny13 series low power CMOS 8 bit microcontroller is based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny13 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

Advanced RISC architecture

120 powerful instructions

32 x 8 General purpose working registers

Fully static operation

Up to 20 MIPS throughput at 20 MHz

High endurance non-volatile memory segments

1K Bytes of In-system self-programmable flash program memory

64 Bytes EEPROM

64 Bytes internal SRAM

Write/Erase cycles 10,000 Flash/100,000 EEPROM

Data retention 20 years at 85°C

Programming lock for self-programming flash & EEPROM data security

One 8 bit trimer/counter with prescaler and two PWM channels

4-channel, 10-bit ADC with internal voltage reference

DebugWIRE on chip debug system

In system programmable via SPI port

External and internal interrupt sources

Low power Idle, ADC noise reduction, and power-down modes

Enhanced Power on reset circuit

Programmable brown-out detection circuit

Internal calibrated oscillator

8-pin PDIP/SOIC six programmable I/O lines

Operating voltage 1.8 - 5.5 V

relaterade länkar