Microchip ARM Cortex, SAM D21/DA1 Microcontroller, 48 MHz, 128kB FLASH, 32-Pin TQFP
- RS-artikelnummer:
- 236-8840P
- Tillv. art.nr:
- ATSAMD21E17A-AU
- Tillverkare / varumärke:
- Microchip
Mängdrabatt möjlig
Antal 10 enheter (levereras på en bricka)*
270,14 kr
(exkl. moms)
337,68 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 485 enhet(er) från den 22 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 - 20 | 27,014 kr |
| 25 - 45 | 25,044 kr |
| 50 - 95 | 24,506 kr |
| 100 + | 24,058 kr |
*vägledande pris
- RS-artikelnummer:
- 236-8840P
- Tillv. art.nr:
- ATSAMD21E17A-AU
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Product Type | Microcontroller | |
| Series | SAM D21/DA1 | |
| Package Type | TQFP | |
| Pin Count | 32 | |
| Device Core | ARM Cortex | |
| Interface Type | I2S, SERCOM, USB 2.0 | |
| Program Memory Size | 128kB | |
| Maximum Clock Frequency | 48MHz | |
| Maximum Supply Voltage | 3.63V | |
| Analogue Comparators | 4 | |
| DACs | 10 Bit | |
| Number of Programmable I/Os | 52 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | AEC-Q100 | |
| Minimum Supply Voltage | 1.62V | |
| Instruction Set Architecture | Thumb, Arm Cortex | |
| Program Memory Type | FLASH | |
| Automotive Standard | AEC-Q100 Grade 1, AEC-Q100 Grade 2 | |
| ADCs | 12 bit | |
| Number of Timers | 16 | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Product Type Microcontroller | ||
Series SAM D21/DA1 | ||
Package Type TQFP | ||
Pin Count 32 | ||
Device Core ARM Cortex | ||
Interface Type I2S, SERCOM, USB 2.0 | ||
Program Memory Size 128kB | ||
Maximum Clock Frequency 48MHz | ||
Maximum Supply Voltage 3.63V | ||
Analogue Comparators 4 | ||
DACs 10 Bit | ||
Number of Programmable I/Os 52 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals AEC-Q100 | ||
Minimum Supply Voltage 1.62V | ||
Instruction Set Architecture Thumb, Arm Cortex | ||
Program Memory Type FLASH | ||
Automotive Standard AEC-Q100 Grade 1, AEC-Q100 Grade 2 | ||
ADCs 12 bit | ||
Number of Timers 16 | ||
The Microchip low power microcontrollers using the 32-bit Arm® Cortex®-M0+ processor, and32-pinswith up to 256 KB Flash and 32 KB of SRAM. It operates at a maximum frequency of 48 MHz and reach 2.46 CoreMark/MHz. They are designed for simple and intuitive migration with identical peripheral modules, hex compatible code, identical linear address map, and pin compatible migration paths between all devices in the product series. All devices include intelligent and flexible peripherals, Event System for inter-peripheral signalling, and support for capacitive touch button, slider, and wheel user interfaces.
External interrupt controller (EIC)
16 external interrupts
One non maskable interrupt (NMI)
Two pin serial wire debug (SWD) programming, test and debugging interface
Low power consumption
Idle and Standby Sleep modes
SleepWalking peripherals
12 Channel Direct memory access controller (DMAC)
12 Channel Event System
Up to five 16-bit trimer/counters
One 16-bit TC with two compare/capture channels
One 8 bit TC with two compare/capture channels
One 32-bit TC with two compare/capture channels, by using two TCs