STMicroelectronics STM32F302K8U6, 32 bit ARM Cortex M4, STM32F302K8 Microcontroller, 72 MHz, 64kB FLASH, 32-Pin UFQFPN

Antal 5 enheter (levereras på en bricka)*

193,54 kr

(exkl. moms)

241,925 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 1 435 enhet(er) från den 11 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
5 +38,708 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
196-2022P
Tillv. art.nr:
STM32F302K8U6
Tillverkare / varumärke:
STMicroelectronics
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

STMicroelectronics

Family Name

STM32F3

Package Type

UFQFPN

Mounting Type

Surface Mount

Pin Count

32

Device Core

ARM Cortex M4

Data Bus Width

32bit

Program Memory Size

64 kB

Maximum Frequency

72MHz

RAM Size

16 kB

USB Channels

1

Number of SPI Channels

2

Number of I2C Channels

3

Typical Operating Supply Voltage

2 → 3.6 V

Number of CAN Channels

1

Number of USART Channels

2

Minimum Operating Temperature

-40 °C

Height

0.55mm

Maximum Operating Temperature

+85 °C

Width

5.1mm

ADCs

8 x 12 bit

Instruction Set Architecture

RISC

Dimensions

5.1 x 5.1 x 0.55mm

Program Memory Type

Flash

Number of ADC Units

1

Length

5.1mm

COO (Country of Origin):
CN
The STM32F302x6/8 family is based on the high-performance ARM® Cortex®-M4 32-bit RISC core operating at a frequency of up to 72 MHz and embedding a floating point unit (FPU). The family incorporates high-speed embedded memories (up to 64 Kbytes of Flash memory, 16 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The devices offer a fast 12-bit ADC (5 Msps), three comparators, an operational amplifier, up to 18 capacitive sensing channels, one DAC channel, a low-power RTC, one general-purpose 32-bit timer, one timer dedicated to motor control, and up to three general-purpose 16-bit timers, and one timer to drive the DAC. They also feature standard and advanced communication interfaces: three I2Cs, up to three USARTs, up to two SPIs with multiplexed full-duplex I2S, a USB FS device, a CAN, and an infrared transmitter.