STMicroelectronics, 32 bit ARM Cortex M0+, STM32G031J6 Microcontroller, 64 MHz, 32kB FLASH, 8-Pin SO-8

Se alla Microcontrollers
Mängdrabatt möjlig

Antal (1 rör med 100 enheter)*

1 283,60 kr

(exkl. moms)

1 604,50 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 06 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per Rør*
100 - 40012,836 kr1 283,60 kr
500 - 90011,654 kr1 165,40 kr
1000 - 240011,348 kr1 134,80 kr
2500 - 990011,057 kr1 105,70 kr
10000 +10,78 kr1 078,00 kr

*vägledande pris

RS-artikelnummer:
193-9843
Tillv. art.nr:
STM32G031J6M6
Tillverkare / varumärke:
STMicroelectronics
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

STMicroelectronics

Series

STM32G031J6

Product Type

Microcontroller

Package Type

SO-8

Mount Type

Surface

Pin Count

8

Device Core

ARM Cortex M0+

Data Bus Width

32bit

Program Memory Size

32kB

Maximum Clock Frequency

64MHz

RAM Size

8kB

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Standards/Approvals

FBI

Length

5mm

Width

4 mm

Height

1.5mm

Minimum Supply Voltage

1.7V

Automotive Standard

No

Instruction Set Architecture

RISC

ADCs

8 x 12 Bit

Program Memory Type

FLASH

COO (Country of Origin):
CN
The STM32G474xB/xC/xE devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core. They operate at a frequency of up to 170 MHz.

The Cortex-M4 core features a single-precision floating-point unit (FPU), which supports all the Arm single-precision data-processing instructions and all the data types. It also implements a full set of DSP (digital signal processing) instructions and a memory protection unit (MPU) which enhances the application’s security.

These devices embed high-speed memories (512 Kbytes of Flash memory, and 128 Kbytes of SRAM), a flexible external memory controller (FSMC) for static memories (for devices with packages of 100 pins and more), a Quad SPI Flash memory interface, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

The devices also embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, securable memory area and proprietary code readout protection.

The devices embed peripherals allowing mathematical/arithmetic function acceleration (CORDIC for trigonometric functions and FMAC unit for filter functions).

They offer five fast 12-bit ADCs (5 Msps), seven comparators, six operational amplifiers, seven DAC channels (3 external and 4 internal), an internal voltage reference buffer, a lowpower RTC, twothree general-purpose 32-bit timers, three 16-bit PWM timers dedicated to motor control, seven general-purpose 16-bit timers, and one 16-bit low-power timer, and high resolution timer with 184 ps resolution.

They also feature standard and advanced communication interfaces such as:

• Four I2Cs

• Four SPIs multiplexed with two half duplex I2Ss

• Three USARTs, two UARTs and one low-power UART.

• Three FDCANs

• One SAI

• USB device

• UCPD

The devices operate in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. Some independent power supplies are supported including an analog independent supply input for ADC, DAC, OPAMPs and comparators. A VBAT input allows backup of the RTC and the registers.

The STM32G474xB/xC/xE family offers 8 packages from 48-pin to 128-pin

relaterade länkar