Microchip, 8bit AVR, ATtiny404 Microcontroller, 20MHz, 4 kB Flash, 14-Pin SOIC

Se alla Microcontrollers

Antal (1 förpackning med 25 enheter)*

144,925 kr

(exkl. moms)

181,15 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 400 enhet(er) från den 08 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
25 +5,797 kr144,93 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
193-6227
Tillv. art.nr:
ATTINY404-SSN
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Family Name

ATtiny404

Package Type

SOIC

Mounting Type

Surface Mount

Pin Count

14

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

4 kB

Maximum Frequency

20MHz

RAM Size

256 B

USB Channels

0

Number of SPI Channels

1

Number of UART Channels

1

Number of I2C Channels

1

Typical Operating Supply Voltage

1.8 → 5.5 V

Number of CAN Channels

0

Number of USART Channels

0

Number of LIN Channels

0

Maximum Number of Ethernet Channels

0

Dimensions

8.74 x 3.99 x 1.5mm

Number of Ethernet Channels

0

Minimum Operating Temperature

-40 °C

ADCs

10 x 10 bit

Width

3.99mm

Program Memory Type

Flash

Number of ADC Units

1

Maximum Operating Temperature

+125 °C

Number of PCI Channels

0

Instruction Set Architecture

RISC

Height

1.5mm

Length

8.74mm

The ATtiny404 is a microcontroller using the 8-bit AVR® processor with hardware multiplier, running at up to 20MHz and 4KB Flash, 256B SRAM and 128 bytes of EEPROM in a 14-pin package. The series uses the latest technologies from Microchip with a flexible and low power architecture including Event System and SleepWalking, accurate analog features and advanced peripherals.

8-bit high-performance AVR RISC CPU
135 instructions
Hardware multiplier
Ultra Low Power (ULP)
Three sleep modes
Idle
Standby
Power Down
6 Channels Event System
Configurable Custom Logic (CCL)
12 Channel 10-bit ADC with Voltage Reference
Comparators
2x 16-bit Timer (TCA / TCB)
Cyclical Redundancy Check (CRC/SCAN)
Watchdog Timer (WDT)
Power-On Reset (POR)
Brown-Out Detection (BOD)
Single pin programming and debugging interface (UPDI)
Operation Voltage: 1.8V – 5.5V

relaterade länkar