STMicroelectronics STM32L051R6T6, 32 bit ARM Cortex M0+, STM32L051R6 Microcontroller, 32 MHz, 32kB FLASH, 64-Pin LQFP

Antal 5 enheter (levereras på en bricka)*

130,10 kr

(exkl. moms)

162,60 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 135 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
5 +26,02 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
189-4112P
Tillv. art.nr:
STM32L051R6T6
Tillverkare / varumärke:
STMicroelectronics
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

STMicroelectronics

Product Type

Microcontroller

Series

STM32L051R6

Package Type

LQFP

Mount Type

Surface

Pin Count

64

Device Core

ARM Cortex M0+

Data Bus Width

32bit

Program Memory Size

32kB

Maximum Clock Frequency

32MHz

RAM Size

8kB

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Length

10mm

Standards/Approvals

No

Analogue Comparators

2

Number of Programmable I/Os

51

Width

10 mm

Height

1.45mm

Maximum Power Dissipation Pd

444mW

Minimum Supply Voltage

1.65V

Instruction Set Architecture

RISC

Automotive Standard

No

Program Memory Type

FLASH

Number of Timers

1

ADCs

16 x 12 Bit

Ultra-low-power platform

1.65 V to 3.6 V power supply

-40 to 125 °C temperature range

0.27 μA Standby mode (2 wakeup pins)

0.4 μA Stop mode (16 wakeup lines)

0.8 μA Stop mode + RTC + 8 KB RAM retention

88 μA/MHz in Run mode

3.5 μs wakeup time (from RAM)

5 μs wakeup time (from Flash memory)

Core: Arm® 32-bit Cortex®-M0+ with MPU

From 32 kHz up to 32 MHz max.

0.95 DMIPS/MHz

Memories

Up to 64 KB Flash memory with ECC

8KB RAM

2 KB of data EEPROM with ECC

20-byte backup register

Sector protection against R/W operation

Up to 51 fast I/Os (45 I/Os 5V tolerant)

Reset and supply management

Ultra-safe, low-power BOR (brownout reset) with 5 selectable thresholds

Ultra-low-power POR/PDR

Programmable voltage detector (PVD)

Clock sources

1 to 25 MHz crystal oscillator

32 kHz oscillator for RTC with calibration

High speed internal 16 MHz factory-trimmed RC (+/- 1%)

Internal low-power 37 kHz RC

Internal multispeed low-power 65 kHz to 4.2 MHz RC

PLL for CPU clock

Pre-programmed bootloader

USART, SPI supported

Development support

Serial wire debug supported

Rich Analogue peripherals

12-bit ADC 1.14 Msps up to 16 channels (down to 1.65 V)

2x ultra-low-power comparators (window mode and wake up capability, down to 1.65 V)

7-channel DMA controller, supporting ADC, SPI, I2C, USART, Timers

7x peripheral communication interfaces

2x USART (IrDA), 1x UART (low power)

Up to 4x SPI 16 Mbits/s

2x I2C (SMBus/PMBus)

9x timers: 1x 16-bit with up to 4 channels, 2x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC, 1x 16-bit basic, and 2x watchdogs (independent/window)

CRC calculation unit, 96-bit unique ID