Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Microchip
	Family Name	PIC18F
	Package Type	TQFP
	Mounting Type	Surface Mount
	Pin Count	80
	Device Core	PIC
	Data Bus Width	8bit
	Program Memory Size	128 kB
	Maximum Frequency	64MHz
	RAM Size	3.862 kB
	USB Channels	1
	Number of PWM Units	1
	Number of SPI Channels	2
	Number of I2C Channels	2
	Typical Operating Supply Voltage	2 → 3.6 V
	Number of UART Channels	4
	Maximum Operating Temperature	+85 °C
	Minimum Operating Temperature	-40 °C
	Dimensions	12 x 12 x 1.05mm
	ADCs	24 x 12 bit
	Instruction Set Architecture	Harvard
	Program Memory Type	Flash
	Number of ADC Units	1
	Width	12mm
	Length	12mm
	Height	1.05mm
	Number of LIN Channels	1

	Välj alla
	Brand Microchip
	Family Name PIC18F
	Package Type TQFP
	Mounting Type Surface Mount
	Pin Count 80
	Device Core PIC
	Data Bus Width 8bit
	Program Memory Size 128 kB
	Maximum Frequency 64MHz
	RAM Size 3.862 kB
	USB Channels 1
	Number of PWM Units 1
	Number of SPI Channels 2
	Number of I2C Channels 2
	Typical Operating Supply Voltage 2 → 3.6 V
	Number of UART Channels 4
	Maximum Operating Temperature +85 °C
	Minimum Operating Temperature -40 °C
	Dimensions 12 x 12 x 1.05mm
	ADCs 24 x 12 bit
	Instruction Set Architecture Harvard
	Program Memory Type Flash
	Number of ADC Units 1
	Width 12mm
	Length 12mm
	Height 1.05mm
	Number of LIN Channels 1

Datasheet

COO (Country of Origin):: US

The PIC18F87J94 8-bit microcontroller offers USB and segmented LCD (upto 368 segments) with nanoWatt XLP technology in the same device. With upto 100 pin and 128K flash devices in the family, which is the first on a 8-bit PIC® MCU, this family has a rich peripheral set like CTMU, hardware RTCC, 12 bit A/D, along with the standard ones. With the support of Vbat mode, for battery based applications, they are best suited for applications like, hand held devices, data loggers, medical applications etc

nanoWatt XLP technology
Deep sleep current is 60 nA typical
WDT : 650 nA @ 2V typical
RTCC: 650 nA @ 32kHz, 2V typical
Vbat allows lowest power consumption on back up battery
Multiple, Switchable Clock Modes for Optimum Performance and Power Management
USB 2.0 full speed compliant with on chip transceiver
368 segments of LCD display.
46 X 8 commons
Drives LCD panel in Sleep mode
Internal charge pump for LCD
64Mhz and upto 16 MIPS performance
Four 16 bit timers/counters

Microchip, 8bit PIC, PIC18F Microcontroller, 64MHz, 128 kB Flash, 80-Pin TQFP

relaterade länkar