Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Microchip
	Family Name	PIC18LF
	Package Type	SOIC
	Mounting Type	Surface Mount
	Pin Count	28
	Device Core	PIC
	Data Bus Width	16bit
	Program Memory Size	64 kB
	Maximum Frequency	64MHz
	RAM Size	4 kB
	USB Channels	0
	Number of PWM Units	4 x 10 bit
	Number of SPI Channels	1
	Number of USART Channels	0
	Typical Operating Supply Voltage	3.6 (Maximum) V
	Number of UART Channels	2
	Number of I2C Channels	1
	Number of CAN Channels	1
	Height	2.35mm
	Number of LIN Channels	1
	Number of Ethernet Channels	0
	Number of PCI Channels	0
	Pulse Width Modulation	4 (4 x 10 bit)
	Dimensions	17.9 x 7.5 x 2.35mm
	Width	7.5mm
	Program Memory Type	Flash
	Minimum Operating Temperature	-40 °C
	Instruction Set Architecture	RISC
	Maximum Number of Ethernet Channels	0
	ADCs	24 x 12 bit
	Length	17.9mm
	Number of ADC Units	1
	Maximum Operating Temperature	+85 °C

	Välj alla
	Brand Microchip
	Family Name PIC18LF
	Package Type SOIC
	Mounting Type Surface Mount
	Pin Count 28
	Device Core PIC
	Data Bus Width 16bit
	Program Memory Size 64 kB
	Maximum Frequency 64MHz
	RAM Size 4 kB
	USB Channels 0
	Number of PWM Units 4 x 10 bit
	Number of SPI Channels 1
	Number of USART Channels 0
	Typical Operating Supply Voltage 3.6 (Maximum) V
	Number of UART Channels 2
	Number of I2C Channels 1
	Number of CAN Channels 1
	Height 2.35mm
	Number of LIN Channels 1
	Number of Ethernet Channels 0
	Number of PCI Channels 0
	Pulse Width Modulation 4 (4 x 10 bit)
	Dimensions 17.9 x 7.5 x 2.35mm
	Width 7.5mm
	Program Memory Type Flash
	Minimum Operating Temperature -40 °C
	Instruction Set Architecture RISC
	Maximum Number of Ethernet Channels 0
	ADCs 24 x 12 bit
	Length 17.9mm
	Number of ADC Units 1
	Maximum Operating Temperature +85 °C

The PIC18(L)F25/26K83 microcontroller family with CANTM technology in 28-pins features a 12-bit ADC with Computation (ADC2) automating Capacitive Voltage Divider (CVD) techniques for advanced touch sensing, averaging, filtering, oversampling and threshold comparison.

Supports CAN 1.2, 2.0A and 2.0B
Six modes of operation
Supports legacy - Fully backward compatibly
Vectored Interrupt (VI) capability - Faster interrupt response time
Interrupt Vector Table
Programmable single or dual priority
Two level hardware context saving
Eliminates need for CPU involvement in data transfers
Access to all memory spaces and peripherals
Flexible source and destination message sizes
Programmable DMA priority
Hardware Capacitive Voltage Divider (CVD)
Unbuffered I/O pin output
2 x Comparators
Comparator hysteresis enable
Invert output polarity
Zero-Cross Detection
Senses high voltage AC signal
Generates interrupts on zero cross

Microchip, 16bit PIC, PIC18LF Microcontroller, 64MHz, 64 kB Flash, 28-Pin SOIC

relaterade länkar