Microchip, 8bit PIC, PIC16F Microcontroller, 32MHz, 3.5 kB Flash, 14-Pin PDIP

Se alla Microcontrollers
För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.
RS-artikelnummer:
165-4142
Tillv. art.nr:
PIC16F18323-I/P
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Family Name

PIC16F

Package Type

PDIP

Mounting Type

Through Hole

Pin Count

14

Device Core

PIC

Data Bus Width

8bit

Program Memory Size

3.5 kB

Maximum Frequency

32MHz

RAM Size

256 B

USB Channels

0

Number of PWM Units

1 x 10 bit

Number of SPI Channels

1

Number of CAN Channels

0

Number of I2C Channels

1

Typical Operating Supply Voltage

2.3 → 5.5 V

Number of UART Channels

1

Number of USART Channels

1

Height

5.33mm

Width

0.28in

Dimensions

0.77 x 0.28 x 0.21in

Pulse Width Modulation

1 (2 x 10 bit)

Number of Ethernet Channels

0

Number of ADC Units

1

Maximum Operating Temperature

+85 °C

Length

19.56mm

Number of LIN Channels

1

Number of PCI Channels

0

Maximum Number of Ethernet Channels

0

Instruction Set Architecture

RISC

Minimum Operating Temperature

-40 °C

Program Memory Type

Flash

ADCs

11 x 10 bit

COO (Country of Origin):
TH

PIC16F18313/18323 8-Bit Microcontrollers


The PIC16F range of Microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip’s PIC® architecture in various pin and package options.

PIC16F18313/18323 Microcontrollers are based on Microchip’s Enhanced Mid-Range core and include new Low-Power features. IDLE and DOZE modes have been added along with Peripheral Module Disable, this allows peripherals to be removed from the power rail and clock tree for zero power leakage.

Microcontroller Features


32 MHz Max. CPU Speed

49 Instructions

16 Level Hardware Stack

Interrupt Capability

Internal Oscillator

6 or 12 I/O Pins

Power-On Reset (POR)

Configurable Power-Up Timer (PWRTE)

Brown-Out Reset (BOR) and Low-Power Brown-Out Reset (LPBOR)

Windowed Watchdog Timer (WWDT)

In-Circuit Serial Programming (ICSP)

In-Circuit Debug (ICD)

Low voltage Programming (LVP)

Peripheral Pin Select (PPS)

Power-Saving Features


Peripheral Module Disable (PMD) – Ability to disable unused peripherals for minimal power consumption

SLEEP, IDLE and DOZE Low-Power Modes

Sleep mode: 50 nA @ 1.8 V (typical)

Watchdog Timer: 500 nA @ 1.8 V (typical)

Secondary Oscillator: 500 nA @ 32 kHz

Operating Current: 8 μA @ 32 kHz 1.8 V (typical)

Peripheral Features


10-bit Analogue-to-Digital Converter – 5 or 11 channels depending on model

5-Bit Digital-to-Analogue Converter (DAC)

Two Comparators (COMP) - 1 or 2 depending on model

Voltage Reference

Two Configurable Logic Cells (CLC)

Complementary Waveform Generator (CWG)

Two Capture/Compare/PWM (CCP) modules

Two 10-bit PWMs

Numerically Controlled Oscillator (NCO)

EUSART – RS-232, RS-485 and LIN compatible

Master Synchronous Serial Port (MSSP) – I2C, SMBus, PMBus compatible

Data Signal Modulator (DSM)

Two 8-bit Timers with Hardware Limit Timer (HLT)

One 16-bit Timer

relaterade länkar