Microchip ATXMEGA16A4U-MH, 16 bit AVR, ATXMEGA16A4U Microcontroller, 32 MHz, 16kB FLASH, 44-Pin VQFN

Se alla Microcontrollers
Mängdrabatt möjlig

Antal (1 förpackning med 2 enheter)*

88,59 kr

(exkl. moms)

110,738 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 26 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
2 - 844,295 kr88,59 kr
10 - 2243,23 kr86,46 kr
24 - 9841,89 kr83,78 kr
100 +41,05 kr82,10 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
133-1707
Tillv. art.nr:
ATXMEGA16A4U-MH
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Series

ATXMEGA16A4U

Product Type

Microcontroller

Package Type

VQFN

Mount Type

Surface

Pin Count

44

Device Core

AVR

Data Bus Width

16bit

Program Memory Size

16kB

Interface Type

PDI, SPI, TWI, USART

Maximum Clock Frequency

32MHz

RAM Size

2kB

Maximum Supply Voltage

3.6V

Analogue Comparators

2

DACs

2 x 12 Bit

Number of Programmable I/Os

34

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Standards/Approvals

No

Height

0.95mm

Length

7.1mm

Width

7.1 mm

Minimum Supply Voltage

1.6V

Number of Timers

1

Instruction Set Architecture

RISC

Automotive Standard

No

ADCs

11 x 12 Bit

Program Memory Type

FLASH

8/16-Bit AVR XMEGA Microcontrollers


Atmel AVR XMEGA microcontrollers deliver the best possible combination of real-time performance, high integration and low power consumption for 8/16-bit MCU applications.

Atmel AVR XMEGA devices employ advanced analogue-to-digital converters (ADCs) that deliver both high speed and high resolution. These ADCs offer up to four conversion channels with different result registers, which can have different setup and configuration processes. This provides easier use since different software modules can access and use an ADC independently.

The Event System facilitates inter-peripheral signaling for short and 100% predictable response time. This ensures real-time control, and also offloads the CPU because each time an event is used, one interrupt with context switch is eliminated. Most of the peripherals and the DMA controller are connected to the Event System. The AVR XMEGA E series features an asynchronous peripheral Event System instead.

The AVR XMEGA 4-channel direct memory access (DMA) controller can be used for fast, CPU-independent data transfer between any combination of data memory and peripherals.

AVR XMEGA devices use the Atmel AVR CPU. The instruction set and design of the CPU are tuned to minimize code size and maximize execution speed. Its true single-cycle execution of arithmetic and logic operations means AVR XMEGA microcontrollers perform close to 1MIPS per MHz. The fast-access register file with 32 x 8-bit general-purpose working registers is directly connected to the arithmetic logic unit (ALU). During a single clock cycle, the ALU can be fed two arbitrary registers, do a requested operation, and write back the result. It provides efficient support for 8-, 16- and 32-bit arithmetic.

relaterade länkar