MikroElektronika MIKROE-1989, EEPROM3 Click EEPROM Development Board for AT24CM02 for mikroBUS

  • RS-artikelnummer 136-0760
  • Tillv. art.nr MIKROE-1989
  • Tillverkare / varumärke MikroElektronika
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

EEPROM3 click mikroBUS™

The EEPROM3 click is an add-on board for storing initialisation and configuration data of your application. The Atmel AT24CM02 device is a 2Mbit Electrically Erasable PROgrammable Memory (EEPROM) organised as 262144 x 8 bits of memory, accessed through the I²C bus.

EEPROM: 2M bit (256 KBytes)Page size: 256 BytesByte or Page Write within 10 msWrite Protect Pin for Full Array Hardware Data ProtectionSelect the device address with an on-board jumper3.3 V or 5 V power supply on mikroBUS socketMore than 1 million Write cyclesDimensions 28.6 x 25.4 mm

Note

Click board comes with the header strips soldered.

Click mikroBUS™ Memory Boards

Specifikationer
Attribute Value
Memory Technology EEPROM
Kit Classification Development Board
For Use With MikroBUS
Featured Device AT24CM02
Kit Name EEPROM3 click
9 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
131,42 kr
(exkl. moms)
164,28 kr
(inkl. moms)
Enheter
Per unit
1 - 4
131,42 kr
5 - 9
120,87 kr
10 - 24
111,16 kr
25 - 49
109,00 kr
50 +
107,64 kr
Related Products
Demonstration boards for the TS1103, available in a ...
Description:
Demonstration boards for the TS1103, available in a choice of four gain options; 25, 50, 100 and 200. These boards are fully assembled and tested. The board is configured with an 50 mOhm resistor. They have five dedicated test points; ...
The Silicon Labs TS1108 coulomb counter measures the ...
Description:
The Silicon Labs TS1108 coulomb counter measures the current your circuit is using and is perfect for measuring battery depletion. The TS1108 uses a voltage to frequency converter to send a series of 90 μs output pulses to COUT. This ...
The ClockBuilder Pro Field Programmer when used with ...
Description:
The ClockBuilder Pro Field Programmer when used with ClockBuilder Pro software, makes it simple for systems designers to develop, program and debug any Si534x or Si538x clock device “in-system”, or in one of the convenient QFN sockets. The field programmer ...
Add memory to your project with EERAM 3.3V ...
Description:
Add memory to your project with EERAM 3.3V click. It carries the 47L16 EERAM, a 16Kbit SRAM with EEPROM Backup from Microchip. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over ...