Legris High Pressure Ball Valve Brass 1/4 in G 2 Way
- RS-artikelnummer 231-5118
- Tillv. art.nr 6402 07 13
- Tillverkare / varumärke Legris
Panel Mountable
Mountable in-line ball valve for closing fluid systems with a simple quarter turn of the handle
full flow
Optimum sealing due to compensating "O" rings
Excellent resistance to scaling due to ball seal configuration
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
| Attribute | Value |
|---|---|
| Attachment Type | Threaded |
| Threaded Connection | 1/4 in G |
| Body Material | Brass |
| Thread Size | 1/4in |
| Safe for Use With | Water |
| Maximum Working Pressure | 40 bar |
| Connection Size mm | 8mm |
| Connection Size inch | 1/4in |
| Type | 2 Way |
