Texas Instruments DS90C365AMT/NOPB, LVDS Transceiver 3 Flat Panel Display, 48-Pin TSSOP

Se alla LVDS Interface Ics
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.

Alternativ

Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.

presentation
LVDS transmitter,DS90CF363AMTD SOIC48
RS-artikelnummer
469-8566

Varje

81,15 kr

(exkl. moms)

101,44 kr

(inkl. moms)

RS-artikelnummer:
121-8582
Tillv. art.nr:
DS90C365AMT/NOPB
Tillverkare / varumärke:
Texas Instruments
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Texas Instruments

Number of Drivers

3

IC Type

Transceiver IC

Output Type

Flat Panel Display

Transmission Data Rate

612.5Mbps

Number of Elements per Chip

3

Mounting Type

Surface Mount

Package Type

TSSOP

Pin Count

48

Dimensions

12.5 x 6.1 x 0.9mm

Height

0.9mm

Length

12.5mm

Maximum Operating Supply Voltage

3.6 V

Width

6.1mm

Minimum Operating Temperature

-10 °C

Minimum Operating Supply Voltage

3 V

Maximum Operating Temperature

+70 °C

COO (Country of Origin):
US

FlatLink/FPD-Link Serialiser/Deserialiser, Texas Instruments


LVDS Transmitters for use with 24-bit FPD (Flat Panel Display) links operating at 65 and 85 MHz.

LVCMOS/LVTTL inputs
3.3V Low-power operation
PLL transmitter data clock
Complies with TIA/EIA-644 LVDS standard

The Texas Instruments DS90C365A is a pin to pin compatible replacement for DS90C363, DS90C363A and DS90C365. The DS90C365A has additional features and improvements making it an ideal replacement for DS90C363, DS90C363A and DS90C365. family of LVDS Transmitters.

Pin-to-pin compatible to DS90C363, DS90C363A and DS90C365
No special start-up sequence required between clock/data and /PD pins. Input signals (clock and data) can be applied either before or after the device is powered.
Support Spread Spectrum Clocking up to 100kHz frequency modulation & deviations of ±2.5% centre spread or -5% down spread.
“Input Clock Detection” feature will pull all LVDS pairs to logic low when input clock is missing and when /PD pin is logic high.
18 to 87.5 MHz shift clock support
TX power consumption < 146 mW (typ) at 87.5 MHz Grayscale
TX Power-down mode < 37 uW (typ)
Supports VGA, SVGA, XGA, SXGA (dual pixel), SXGA+ (dual pixel), UXGA (dual pixel).
Narrow bus reduces cable size and cost
Up to 1.785 Gbps throughput
Up to 223.125 Megabytes/sec bandwidth
345 mV (typ) swing LVDS devices for low EMI
PLL requires no external components
Compliant to TIA/EIA-644 LVDS standard
Low profile 48-lead TSSOP package


LVDS Communication


Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables.


Applications: Firewire, SATA, SCSI

relaterade länkar