Osram ST151, Glow Fluorescent Light Starter, 4 → 22 W, 230 V ac, 35 mm length , 21.5mm Diameter

  • RS-artikelnummer 106-537
  • Tillv. art.nr ST151
  • Tillverkare / varumärke Osram
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): DE
Produktdetaljer

OSRAM ST111/ST151/ST171 Starters

Introducing the ST111/ST151/ST171 series of fluorescent tube lamps starters from OSRAM. These high-quality devices have been designed to ignite every time, reliably and quickly. Each starter is a subject to strict manufacturing and quality control tests. Thanks to using the excellent quality components, these starters ensure long-life operation of up to 4 years and extend the lamp life by 20%. The case is made of Makrolon (self-extinguishing plastic) and meet the conditions laid down for protection class II.

Features and Benefits:

• DEOS® ST 171 SAFETY, DEOS® ST 172 SAFETY and DEOS® ST 173 SAFETY are safety starters
• DEOS® ST 172 SAFETY is a safety starter for series circuits (tandem circuits)
• DEOS® ST 171 SAFETY, DEOS® ST 172 SAFETY and DEOS® ST 173 SAFETY are designed to operate with conventional control gear (CCG) and low-loss gear (LLG)
• They reliably disconnect burnt-out or faulty lamps under inductive or capacitive operating conditions
• They are instantly ready for operation when the red button is pressed in (there must be an audible click)
• The automatic cutout circuit protects the choke and the starter itself
• Four times the life of conventional starters
• To ensure reliable ignition and operation the DEOS® ST should be replaced after every four lamp replacements.
• Temperature range for reliable cutout: -20°C…+80°C
• Extends the lamp life by 20%
• Self-extinguishing plastic casing made of Makrolon. Class V2
• Equipped with special radio-interference suppression capacitor (foil winding capacitor)
• Suitable for 220V-240V AC operation. 50/60 Hz, series circuit and single circuit 4W ...22W at 110V/127V

NOTE: To ensure reliable ignition we recommend that you also replace the starter when you replace the lamp. Starters cannot be used for OSRAM DULUX S/E, D/E, T/E or T/E IN lamps.

Approvals and Certification:

• ENEC 10 VDE
• Protection Class II

Typical Applications:

Lighting starters, also known as glow tube starters or tube light starters are devices designed to preheat the electrodes of fluorescent lamps and generate an ignition pulse. Fluorescent starters are an integral element of every fluorescent lighting set.

FAQs:

Can Fluorescent Lamps work without a starter?
No, Fluorescent lamps cannot work without a starter. A starter is required to generate an ignition pulse. Once that process is initiated, the ballast takes over providing sufficient voltage and regulating the current.

My brand new lamp fails to ignite but the starter switches without interruption. What causes the problem?
The lamp you installed probably doesn't ignite because of its wrong voltage. Please, check the lamp and replace with the correct voltage one if necessary. Also, if possible replace the starter.

Series starter is rated at 110 V ac

Specifikationer
Attribute Value
Type Glow
Wattage 4 → 22 W
Voltage Rating 230 V ac
Number of Lamps 2
Number of Pins 2
Length 35 mm
Diameter 21.5mm
2960 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 10)
7,031 kr
(exkl. moms)
8,789 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
10 +
7,031 kr
70,31 kr
Related Products
Professional range of Allen Bradley general purpose MCBs ...
Description:
Professional range of Allen Bradley general purpose MCBs accessories from the 1492 series. Accessories include auxiliary contacts, single phase busbars, busbar end caps, protective shrouds, shunt trips and terminal power feeds. All accessories are highly reliable and excellent quality.
The Cressall single voltage AC6 for testing portable ...
Description:
The Cressall single voltage AC6 for testing portable generators is a resistive type device with the capacity of 6kW, 230VAC. It has a 0 to 6kW in 333W switched steps of 333W. 666W, 3 x 1kW, and 1 x 2kW ...
240 Vac 50HzDesigned to control the flow of ...
Description:
240 Vac 50HzDesigned to control the flow of water in iron and copper pipeNormally closedSpring return actionManual lever for filling/draining systemEnd switch for electrical control of pump and boilerPowerhead replaceable without draining downMotor changeable without replacing whole powerheadHigh close off ...
RS Pro continuously rated single phase transformer. These ...
Description:
RS Pro continuously rated single phase transformer. These safety site transformers are high quality, UK manufactured to BSEN 61588 and fully compliant with reduced low voltage regulations. Encased in a robust GRP enclosure, this high-quality safety isolating transformer is suited ...