Sensata / Cynergy3 ILLS Series Pressure Level Transmitter, 4-20mA Output, Cable, Stainless Steel Body
- RS-artikelnummer:
- 869-7655
- Distrelec artikelnummer:
- 304-02-366
- Tillv. art.nr:
- ILLS-G0500-5-007
- Tillverkare / varumärke:
- Sensata / Cynergy3
För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.
Alternativ
Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.
Varje
3 044,47 kr
(exkl. moms)
3 805,59 kr
(inkl. moms)
- RS-artikelnummer:
- 869-7655
- Distrelec artikelnummer:
- 304-02-366
- Tillv. art.nr:
- ILLS-G0500-5-007
- Tillverkare / varumärke:
- Sensata / Cynergy3
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Sensata / Cynergy3 | |
| Device Type | Pressure | |
| Mounting Type | Cable | |
| Switch Output | 4-20mA | |
| Body Material | Stainless Steel | |
| Cable Length | 7m | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | +60°C | |
| Maximum DC Voltage | 32V | |
| Maximum Current | 28 mA | |
| Maximum Pressure | 10bar | |
| Series | ILLS | |
| Välj alla | ||
|---|---|---|
Brand Sensata / Cynergy3 | ||
Device Type Pressure | ||
Mounting Type Cable | ||
Switch Output 4-20mA | ||
Body Material Stainless Steel | ||
Cable Length 7m | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature +60°C | ||
Maximum DC Voltage 32V | ||
Maximum Current 28 mA | ||
Maximum Pressure 10bar | ||
Series ILLS | ||
- COO (Country of Origin):
- GB
Sensata Cynergy3 Level Transmitter, 7m, 28mA - ILLS Series - ILLS-G0500-5-007
Use this Sensata Cynergy3 level transmitter for a precise way to monitor changes in liquid levels inside your tank. It's simple to install and can be lowered into the tank from the top using the supplied cable.
The AC (alternating current) electrode pair inside the transmitter converts the piezo-resistive probe’s pressure readings into an electrical current. This produces a signal corresponding with the liquid level that's transmitted through the cable to give a precise reading. The cable compensates for any fluctuations in the readings by sending atmospheric pressure to the sensor for greater accuracy.
The AC (alternating current) electrode pair inside the transmitter converts the piezo-resistive probe’s pressure readings into an electrical current. This produces a signal corresponding with the liquid level that's transmitted through the cable to give a precise reading. The cable compensates for any fluctuations in the readings by sending atmospheric pressure to the sensor for greater accuracy.
Features & Benefits
• Corrosion-resistant stainless steel body material for long-lasting performance
• Long cable length of 7m for deep submersion in large tanks
• Broad operating temperature range of -20°C to +60°C for use in harsh environments
• Typical transmission error of less than 0.5% of the final value for high levels of accuracy
• Long cable length of 7m for deep submersion in large tanks
• Broad operating temperature range of -20°C to +60°C for use in harsh environments
• Typical transmission error of less than 0.5% of the final value for high levels of accuracy
relaterade länkar
- Sensata / Cynergy3 ILS Series Pressure Level Transmitter Cable, Stainless Steel Body
- Sensata Cynergy3 Level Switch Float Switch Stainless Steel Body
- Sensata Cynergy3 Level Controller -
- Sensata Cynergy3 OLS2 Series Optical Sensor Level Switch Chassis Mount, Polysulfone Body
- Sensata Cynergy3 OLS5 Series Optical Sensor Level Sensor Chassis Mount, Polysulfone Body
- Sensata Cynergy3 OLS5 Series Optical Sensor Level Switch Chassis Mount, Polysulfone Body
- Sensata Cynergy3 OLS7 Series Optical Sensor Level Switch Chassis Mount, Polysulfone Body
- Sensata Cynergy3 RSF40 Series Reed Level Switch Horizontal Internal, Polypropylene Body