Infineon ICL8810XUMA1 LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8
- RS-artikelnummer:
- 233-4360
- Tillv. art.nr:
- ICL8810XUMA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 förpackning med 20 enheter)*
116,06 kr
(exkl. moms)
145,08 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 2 440 enhet(er) är redo att levereras
- Dessutom levereras 7 500 enhet(er) från den 02 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 20 - 80 | 5,803 kr | 116,06 kr |
| 100 - 180 | 5,511 kr | 110,22 kr |
| 200 - 480 | 5,281 kr | 105,62 kr |
| 500 - 980 | 5,046 kr | 100,92 kr |
| 1000 + | 4,699 kr | 93,98 kr |
*vägledande pris
- RS-artikelnummer:
- 233-4360
- Tillv. art.nr:
- ICL8810XUMA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | LED Driver IC | |
| Output Current | 2mA | |
| Input Voltage | 8/24 V | |
| Input Voltage Type | AC/DC | |
| Dimming Operation | PWM | |
| Maximum Output Power | 125W | |
| Mount Type | Through Hole | |
| Package Type | PG-DSO-8 | |
| Number of Pins | 8 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | ICL8810XU | |
| Height | 1.75mm | |
| Standards/Approvals | RoHS | |
| Width | 4 mm | |
| Length | 5mm | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type LED Driver IC | ||
Output Current 2mA | ||
Input Voltage 8/24 V | ||
Input Voltage Type AC/DC | ||
Dimming Operation PWM | ||
Maximum Output Power 125W | ||
Mount Type Through Hole | ||
Package Type PG-DSO-8 | ||
Number of Pins 8 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series ICL8810XU | ||
Height 1.75mm | ||
Standards/Approvals RoHS | ||
Width 4 mm | ||
Length 5mm | ||
Automotive Standard No | ||
The Infineon ICL8810 is a voltage mode controller for flyback topologies operating in quasiresonant mode and valley switching DCM. It is designed for low and high power lumen LED driver, requiring high power factor and efficiency. The flyback controller is capable of controlling SSR-CV an PSR-CV topologies. Offering a wide usage in low cost applications where a PFC functionality in dual stage topologies is required. For lighting applications, the IC offers a wide power range as well as a comprehensive set of protections, including a power limitation. The IC is easy to design in and requires a minimum number of external components.
Soft-start to reduce stress during turn-on
External start-up circuit control signal with Vcc support in light load operation
Reduced gate driver output voltage during start-up sequence and burst mode allowing smaller Vcc cap
Burst mode for very light loads and low system standby power consumption
relaterade länkar
- Infineon LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8
- Infineon ICL8800XUMA1 LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8
- Infineon ICL8820XUMA1 LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8
- Infineon LED Driver IC, 18 V 1.5 A 8-Pin PG-DSO-8
- Infineon ILD8150XUMA1 LED Driver IC, 18 V 1.5 A 8-Pin PG-DSO-8
- Infineon ILD8150EXUMA1 LED Driver IC, 18 V 1.5 A 8-Pin PG-DSO-8
- Infineon LED Driver IC, 4.5/60 V 1.5 A 8-Pin PG-DSO-8
- Infineon ILD6150XUMA1 LED Driver IC, 4.5/60 V 1.5 A 8-Pin PG-DSO-8