Molex CoB LED Holder for Cree Xlamp CXA25 44 x 30.5mm

  • RS-artikelnummer 797-5932
  • Tillv. art.nr 180720-0002
  • Tillverkare / varumärke Molex
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CN
Produktdetaljer

Molex LED Array Holders

Molex’s LED Array Holders are ideal for OEM light-fixture manufacturers, they simplify the Cree LED installation process and reduce installation time through the use of compression contacts that eliminate the need for hand or SMT soldering and expensive SMT equipment. Using unmatched interconnect technology, Molex’s LED array holders provide a solderless solution for mounting Cree LED arrays into OEM designs. The holders allow Cree LED arrays to be quickly installed into fixtures, enable field replacements and facilitate upgrades to current applications. Molex LED array holders are ideal for applications including: Architectural lighting, Area lighting and Down lighting.

Compression contacts to power array
Releasable wire trap for rework or replacement
Wire to be solid or pre-tinned strand recommended
Screw-mount attachment of LED array and holder to heat sink using M3 or 4-40 screws
Provides voltage isolation between LED and heat sink
Stable connection in high-ambient temperature
Provides dust and impact protection; provides flexible design options
Ideal for lamp and small-fixture applications, including MR16 or track lighting
Allows for field serviceability

Stock numbers 743-5872 and 743-5876 have Double-ended wire-trap terminal, wired in parallel, wire size 18 AWG or 20 AWG.
Stock numbers 743-5885 and 743-5888 have Double-ended wire-trap terminal, wired in series, wire size 18 AWG or 20 AWG.
Stock numbers 743-5882 , 743-5891 and 774-8605 have Double-ended wire-trap terminal, wire size 18 AWG or 20 AWG.
Stock number 797-5939 Single-ended wire-trap terminal, wire size 18 AWG through 22 AWG.
Stock number 797-5932 Double-ended wire-trap terminal, wire size 18 AWG through 22 AWG.

Specifikationer
Attribute Value
For Use With Cree XLamp CXA25
Dimensions 44 x 30.5mm
Length 44mm
Width 30.5mm
72 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
22,33 kr
(exkl. moms)
27,91 kr
(inkl. moms)
Enheter
Per unit
1 - 19
22,33 kr
20 - 74
18,46 kr
75 - 299
17,37 kr
300 - 599
16,77 kr
600 +
15,88 kr
Related Products
The TE Connectivity LED connector is LUMAWISE Endurance ...
Description:
The TE Connectivity LED connector is LUMAWISE Endurance S series with an electrical rating of 30VDC and 1.5A. It has a diameter of 43.5mm and a length of 15.5mm. This connector is compatible with LUMAWISE Endurance S Series Receptacle. • ...
From BJB, this LED Holder is for use ...
Description:
From BJB, this LED Holder is for use with CoB LEDS from the Luxeon range. The PBT plastic fixing has M3 screw holes with a locking washer for easy fitting.
From BJB, this LED Holder is for use ...
Description:
From BJB, this LED Holder is for use with CoB LEDS from the Cree range. The PBT plastic fixing has M3 screw holes with a locking washer for easy fitting, and features an integrated reflector interface.
A range of PCB Mounted Battery Holders:718-8457 Battery ...
Description:
A range of PCB Mounted Battery Holders:718-8457 Battery Connector Assembly, Surface Mount, Top Load, accepts CR2032 Battery718-8472 Battery Connector Assembly, Through Hole Mount, Top Load, accepts CR2032 Battery793-6877 Insert Assembly, 5 Position, Single Key, Dovetail Locator,5 mm Centreline, 7.2 V ...