Sauter LB 500-2. Distance Meter, 500mm Range, 3 % Accuracy
- RS-artikelnummer:
- 136-3538
- Tillv. art.nr:
- LB 500-2
- Tillverkare / varumärke:
- Sauter
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
- RS-artikelnummer:
- 136-3538
- Tillv. art.nr:
- LB 500-2
- Tillverkare / varumärke:
- Sauter
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Sauter | |
| Accuracy | 3 % | |
| Measurement Range | 500mm | |
| Imperial or Metric | Imperial, Metric | |
| Display Type | LCD | |
| Weight | 600g | |
| Model Number p | LB 500-2. | |
| Välj alla | ||
|---|---|---|
Brand Sauter | ||
Accuracy 3 % | ||
Measurement Range 500mm | ||
Imperial or Metric Imperial, Metric | ||
Display Type LCD | ||
Weight 600g | ||
Model Number p LB 500-2. | ||
- COO (Country of Origin):
- CN
Kern Digital Length Measuring Device LB
Kern Digital length measuring device measures distance directly in machines or sites with RS-232 interface.
Features and Benefits
• Digital sliding calliper with a superior precision even at high operation speed
• Easy mounting to machine tools, conveyer, test stands etc.
• Zeroing,pre-added and pre-reduced length as well as switching the unit can be done manually
• Data interface RS-232, standard
Parallels, Surface Finish & Hardness
Surface Finish
Any machined component has a surface geometry which consists of three basic elements:
Form or Curvature - Whether the surface has irregular bumps or dimensional changes
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)
Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.