RS PRO 40 x 8 x 7mm Steel Feather Key
- RS-artikelnummer:
- 302-4223
- Tillverkare / varumärke:
- RS PRO
Antal (1 förpackning med 10 enheter)*
87,10 kr
(exkl. moms)
108,90 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 1 110 enhet(er) från den 29 december 2025
- Dessutom levereras 530 enhet(er) från den 29 december 2025
- Dessutom levereras 800 enhet(er) från den 08 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 10 + | 8,71 kr | 87,10 kr |
*vägledande pris
- RS-artikelnummer:
- 302-4223
- Tillverkare / varumärke:
- RS PRO
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | RS PRO | |
| Key Type | Feather | |
| Dimensions | 40 x 8 x 7mm | |
| Material | Steel | |
| Height | 7mm | |
| Length | 40mm | |
| Width | 8mm | |
| Välj alla | ||
|---|---|---|
Brand RS PRO | ||
Key Type Feather | ||
Dimensions 40 x 8 x 7mm | ||
Material Steel | ||
Height 7mm | ||
Length 40mm | ||
Width 8mm | ||
- COO (Country of Origin):
- DE
RS PRO Steel Feather Key, 40 x 8 x 7 mm
Insert this RS PRO feather key into the keyway of a shaft to connect it to the gear hub of a machine. It allows the components to move in tandem without separating from one another.
This feather key is easy to install as it fits neatly into the recessed key slot, meaning there's no need to tighten screws to hold it in place. You don't have to worry about your machine parts unlocking from one another as the keyway's position along the machine shaft prevents the key from slipping out. You can count on this key to withstand the force of your rotational machinery thanks to its solid steel construction.
As part of the RS PRO range, this part has been engineer-tested for reliability and quality. It's often used on power transition equipment, such as gear drives, pulleys and sprockets.
This feather key is easy to install as it fits neatly into the recessed key slot, meaning there's no need to tighten screws to hold it in place. You don't have to worry about your machine parts unlocking from one another as the keyway's position along the machine shaft prevents the key from slipping out. You can count on this key to withstand the force of your rotational machinery thanks to its solid steel construction.
As part of the RS PRO range, this part has been engineer-tested for reliability and quality. It's often used on power transition equipment, such as gear drives, pulleys and sprockets.
Features and Benefits
- Dimensions of 40 x 8 x 7 mm
- Length of 40 mm
- Width of 8 mm
- Height of 7 mm
- Feather key type
- Steel material