HCPL-7800A-000E Broadcom, Isolation Amplifier, 5 V, 8-Pin PDIP
- RS-artikelnummer:
- 922-5687
- Tillv. art.nr:
- HCPL-7800A-000E
- Tillverkare / varumärke:
- Broadcom
Mängdrabatt möjlig
Antal (1 rör med 50 enheter)*
4 291,40 kr
(exkl. moms)
5 364,25 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 700 enhet(er) är redo att levereras
- Dessutom levereras 900 enhet(er) från den 31 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per Rør* |
|---|---|---|
| 50 - 200 | 85,828 kr | 4 291,40 kr |
| 250 - 450 | 81,659 kr | 4 082,95 kr |
| 500 + | 79,614 kr | 3 980,70 kr |
*vägledande pris
- RS-artikelnummer:
- 922-5687
- Tillv. art.nr:
- HCPL-7800A-000E
- Tillverkare / varumärke:
- Broadcom
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Broadcom | |
| Power Supply Type | Single | |
| Typical Single Supply Voltage | 5 V | |
| Isolation Mode Rejection | 76dB | |
| Number of Channels per Chip | 1 | |
| Maximum Voltage Gain | 18.14dB | |
| Mounting Type | Through Hole | |
| Package Type | PDIP | |
| Pin Count | 8 | |
| Dimensions | 3.56 x 9.8 x 6.35mm | |
| Height | 3.56mm | |
| Width | 6.35mm | |
| Length | 9.8mm | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Temperature | -40 °C | |
| Välj alla | ||
|---|---|---|
Brand Broadcom | ||
Power Supply Type Single | ||
Typical Single Supply Voltage 5 V | ||
Isolation Mode Rejection 76dB | ||
Number of Channels per Chip 1 | ||
Maximum Voltage Gain 18.14dB | ||
Mounting Type Through Hole | ||
Package Type PDIP | ||
Pin Count 8 | ||
Dimensions 3.56 x 9.8 x 6.35mm | ||
Height 3.56mm | ||
Width 6.35mm | ||
Length 9.8mm | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Temperature -40 °C | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
relaterade länkar
- HCPL-7800A-000E Broadcom 5 V, 8-Pin PDIP
- HCPL-7800A-300E Broadcom 5 V, 8-Pin PDIP SMD
- HCPL-7800A-500E Broadcom Maximum of 5.5 V, 8-Pin DIP
- HCPL-7800A-500E Broadcom Maximum of 5.5 V, 8-Pin DIP8 - Gull Wing
- HCPL-7510-300E Broadcom 4.5 → 5.5 V, 8-Pin PDIP
- HCPL-788J-000E Broadcom 16-Pin SOIC
- ACPL-7900-000E Broadcom 3 → 5.5 V, 8-Pin PDIP
- HCPL-7840-300E Broadcom 5 V, 8-Pin PDIP SMD