Broadcom 2-Channel Isolation Amplifier, 8-Pin 5.5 V SSOP
- RS-artikelnummer:
- 714-0209P
- Tillv. art.nr:
- ACPL-C79A-000E
- Tillverkare / varumärke:
- Broadcom
Mängdrabatt möjlig
Antal 10 enheter (levereras i ett rör)*
723,50 kr
(exkl. moms)
904,40 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 776 enhet(er) från den 02 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 - 49 | 72,35 kr |
| 50 - 99 | 69,10 kr |
| 100 - 199 | 60,03 kr |
| 200 + | 57,34 kr |
*vägledande pris
- RS-artikelnummer:
- 714-0209P
- Tillv. art.nr:
- ACPL-C79A-000E
- Tillverkare / varumärke:
- Broadcom
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Broadcom | |
| Product Type | Isolation Amplifier | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 4.5V | |
| Number of Channels | 2 | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Pin Count | 8 | |
| Minimum Operating Temperature | 105°C | |
| Vos - Input Offset Voltage | 2 mV | |
| Isolation Type | Precision Miniature Isolation Amplifiers | |
| Maximum Operating Temperature | -40°C | |
| Width | 6.81 mm | |
| Series | ACPL-C79A | |
| Standards/Approvals | No | |
| Length | 5.85mm | |
| Height | 3.18mm | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Broadcom | ||
Product Type Isolation Amplifier | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 4.5V | ||
Number of Channels 2 | ||
Mount Type Surface | ||
Package Type SSOP | ||
Pin Count 8 | ||
Minimum Operating Temperature 105°C | ||
Vos - Input Offset Voltage 2 mV | ||
Isolation Type Precision Miniature Isolation Amplifiers | ||
Maximum Operating Temperature -40°C | ||
Width 6.81 mm | ||
Series ACPL-C79A | ||
Standards/Approvals No | ||
Length 5.85mm | ||
Height 3.18mm | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Relaterade länkar
- ACPL-C79A-000E Broadcom 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C87B-000E Broadcom 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C870-000E Broadcom 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C87A-000E Broadcom 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C79B-000E Broadcom 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C79A-500E Broadcom, Isolation Amplifier
- ACPL-C79A-500E Broadcom, Isolation Amplifier SO
- ACPL-C784-000E Broadcom 5 V, 8-Pin SSOP