Vishay TSSP95056TR, 56kHz IR Receiver, 950nm ± 50 °, 8m Range, 2 V - 3.6V, SMT, 6.8 x 3 x 3.2mm
- RS-artikelnummer:
- 230-8371P
- Tillv. art.nr:
- TSSP95056TR
- Tillverkare / varumärke:
- Vishay
Mängdrabatt möjlig
Antal 50 enheter (levereras på en kontinuerlig remsa)*
603,70 kr
(exkl. moms)
754,60 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 2 270 enhet(er) från den 22 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 50 - 120 | 12,074 kr |
| 125 - 245 | 10,214 kr |
| 250 - 495 | 9,296 kr |
| 500 + | 8,356 kr |
*vägledande pris
- RS-artikelnummer:
- 230-8371P
- Tillv. art.nr:
- TSSP95056TR
- Tillverkare / varumärke:
- Vishay
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Vishay | |
| Carrier Frequency | 56kHz | |
| Maximum Transmission Distance | 8m | |
| Angle of Half Transmission Distance | ± 50 ° | |
| Wavelength of Peak Sensitivity | 950nm | |
| Daylight Filter Type | Epoxy Lens Cap | |
| Mounting Type | Surface Mount | |
| Dimensions | 6.8 x 3 x 3.2mm | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 2V | |
| Välj alla | ||
|---|---|---|
Brand Vishay | ||
Carrier Frequency 56kHz | ||
Maximum Transmission Distance 8m | ||
Angle of Half Transmission Distance ± 50 ° | ||
Wavelength of Peak Sensitivity 950nm | ||
Daylight Filter Type Epoxy Lens Cap | ||
Mounting Type Surface Mount | ||
Dimensions 6.8 x 3 x 3.2mm | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 2V | ||
The Vishay IR sensor module for reflective sensor with 56 kHz carrier frequency is compact infrared detector modules for presence, proximity, or light curtain applications. They provide an active low output in response to infrared bursts at 940 nm. The frequency of the burst should correspond to the carrier frequency shown in the parts table. It uses continuous AC signal or burst pattern of infrared light. Visible light is suppressed by IR filter.
It provides shielding against EMI
It has up to 2 m for presence and proximity sensing
It has up to 2 m for presence and proximity sensing