ITT Cannon Speedy D Series 1.27mm Pitch 25 Way IDC D-Sub Ribbon Cable Connector, Plug, Steel Shell

  • RS-artikelnummer 437-326
  • Tillv. art.nr DBSF-25P-K87
  • Tillverkare / varumärke ITT Cannon
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): PL
Produktdetaljer

Sub-Miniature D-Type IDC Connectors

These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly.

No cable stripping, soldering or expensive tooling is required
Fully compatible with conventional D connectors and accepts all standard locking systems
Low profile, robust cadmium plated steel shells with black thermoplastic housings fitted with gold plated contacts on a 1.27mm pitch
Can be daisy chained if required
Dims assembled (mm): Width 13, Depth 17 Ways/Length 15//39, 25//53, 37//69

Specifikationer
Attribute Value
Gender Male
Number of Contacts 25
Body Orientation Right Angle
Pitch 1.27mm
Contact Material Copper Alloy
Contact Plating Gold over Nickel
Housing Material Steel
Current Rating 1.5A
Voltage Rating 780 V ac
Dimensions 53 x 21.8 x 12.9mm
Series Speedy D
Depth 12.9mm
Length 53mm
Maximum Operating Temperature +125°C
Width 21.8mm
Minimum Operating Temperature -55°C
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
104,49 kr
(exkl. moms)
130,61 kr
(inkl. moms)
Enheter
Per unit
1 - 19
104,49 kr
20 - 39
96,81 kr
40 +
87,13 kr
Förpackningsalternativ:
Relaterte Produkter
A range of Harting D-sub connectors suitable for ...
Description:
A range of Harting D-sub connectors suitable for cable termination, ideal for communication and data transfer applications. Hard wearing and durable connector construction with a plated steel housing.
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
Thermoplastic backshell for use with D-subminiature connectors. These ...
Description:
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:2 x ...
Grey glass filled polyester mouldings to UL94V-0 with ...
Description:
Grey glass filled polyester mouldings to UL94V-0 with gold plated bifurcated contactsPart assembled ready for insertion of ribbon cable.