- RS-artikelnummer:
- 283-4007
- Tillverkare / varumärke:
- RS PRO
54 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Varje
1 093,70 kr
(exkl. moms)
1 367,12 kr
(inkl. moms)
Enheter | Per unit |
1 - 4 | 1 093,70 kr |
5 - 9 | 1 059,87 kr |
10 + | 1 024,83 kr |
- RS-artikelnummer:
- 283-4007
- Tillverkare / varumärke:
- RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-status: Inte relevant
- COO (Country of Origin):
- IT
Produktdetaljer
RS PRO Line Mounting Hydraulic Flow Control Valve, BSP 1/2 in, 210 bar
Control the flow in your hydraulic systems with this line mounting hydraulic flow control valve from RS PRO. A single-acting valve, it enables you to control and shut off the flow in one direction while allowing it to flow freely in the other.
This control valve is made from nickel-plated brass for optimal protection against corrosion. It's fitted with a nitrile rubber seal to resist both petroleum spills and abrasion. Able to handle flow rates of up to 50 litres per minute, it has a maximum operating temperature of 210 bar.
This needle-operated valve fits onto a BSP 1/2 inch thread and is an essential component in any hydraulic system. These type of systems are found in all kinds of environments, from roller coasters and construction machinery to dishwashers.
Part of the tried and tested RS PRO range, this product has undergone stringent quality controls to ensure safety and consistency.
This control valve is made from nickel-plated brass for optimal protection against corrosion. It's fitted with a nitrile rubber seal to resist both petroleum spills and abrasion. Able to handle flow rates of up to 50 litres per minute, it has a maximum operating temperature of 210 bar.
This needle-operated valve fits onto a BSP 1/2 inch thread and is an essential component in any hydraulic system. These type of systems are found in all kinds of environments, from roller coasters and construction machinery to dishwashers.
Part of the tried and tested RS PRO range, this product has undergone stringent quality controls to ensure safety and consistency.
Features and Benefits
Line mounting hydraulic flow control valve
Nickel-plated brass body
Nitrile rubber seal
Standard BSP 1/2 in thread
Maximum flow rate of 50 L/min
Maximum operating temperature of +100˚C
Minimum operating temperature of -20˚C
Maximum operating temperature of 210 bar
Manufacturer series FT1251/2
Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
Nickel-plated brass body
Nitrile rubber seal
Standard BSP 1/2 in thread
Maximum flow rate of 50 L/min
Maximum operating temperature of +100˚C
Minimum operating temperature of -20˚C
Maximum operating temperature of 210 bar
Manufacturer series FT1251/2
Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specifikationer
Attribute | Value |
---|---|
Connection Port Thread | BSP 1/2 |
Maximum Flow Rate | 50L/min |
Thread Size | 1/2in |
Maximum Operating Pressure | 210bar |
Manufacturer Series | FT1251/2 |
Body Material | Nickel Plated Brass |
Seal Material | Nitrile Rubber |
Thread Standard | BSP |
Maximum Operating Temperature | +100°C |
Minimum Operating Temperature | -20°C |
Mounting Type | Inline |