RS PRO Heating Element, 150 W, 240 V ac
- RS-artikelnummer:
- 790-4867
- Tillverkare / varumärke:
- RS PRO
Mängdrabatt möjlig
Antal (1 enhet)*
708,20 kr
(exkl. moms)
885,25 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 9 enhet(er) är redo att levereras
- Plus 7 enhet(er) är redo att levereras från en annan plats
- Dessutom levereras 12 enhet(er) från den 26 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 2 | 708,20 kr |
| 3 + | 687,01 kr |
*vägledande pris
- RS-artikelnummer:
- 790-4867
- Tillverkare / varumärke:
- RS PRO
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | RS PRO | |
| Element Type | Band Heater | |
| Power Rating | 150 W | |
| Supply Voltage | 240 V ac | |
| Width | 1.5in | |
| Diameter | 25 mm | |
| Peak Temperature | +300°C | |
| Lead Length | 1m | |
| Välj alla | ||
|---|---|---|
Brand RS PRO | ||
Element Type Band Heater | ||
Power Rating 150 W | ||
Supply Voltage 240 V ac | ||
Width 1.5in | ||
Diameter 25 mm | ||
Peak Temperature +300°C | ||
Lead Length 1m | ||
- COO (Country of Origin):
- CN
Sealed Mica Nozzle Heaters
These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.