Honeywell Flange Mount Hall Effect Sensor, CMOS Output, 4.5 → 18 V dc, Barrel Body, 2 mm

Se alla Hall Effect Sensors
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
RS-artikelnummer:
822-3747
Tillv. art.nr:
SNDH-T4C-G01
Tillverkare / varumärke:
Honeywell
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Honeywell

Output Type

CMOS

Body Style

Barrel

Mounting Style

Flange Mount

Supply Voltage

4.5 → 18 V dc

Terminal Type

Connector

Detection Range

2 mm

Switching Current

20 mA

Switching Frequency

1 Hz → 15 kHz

Length

68.8mm

Width

15mm

Dimensions

15 x 68.8 mm

Maximum Operating Temperature

+150°C

Short Circuit Overload Protection

Yes

Reverse Polarity Protection

Yes

Minimum Operating Temperature

-40°C

RoHS-status: Inte relevant

COO (Country of Origin):
US

Honeywell Hall Effect Sensors


The Honeywell SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets.

The Optimum performance is dependent upon variables which must be considered in combination: target material, geometry
and speed, sensor/target gap, and environmental temperature.

All models are highly reliable and provide completely quality.

Please ensure the sensor is mounted so that the center of the sensor face is over the center of the gear teeth or target.
Ensure the mounted sensor is stable and vibration free.