Infineon Hall Effect Sensor, 20 V
- RS-artikelnummer:
- 253-9863P
- Tillv. art.nr:
- TLE4999C4S0001HALA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal 10 enheter (levereras på en kontinuerlig remsa)*
373,00 kr
(exkl. moms)
466,20 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 1 973 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 - 24 | 37,30 kr |
| 25 - 49 | 35,73 kr |
| 50 - 99 | 34,05 kr |
| 100 + | 31,70 kr |
*vägledande pris
- RS-artikelnummer:
- 253-9863P
- Tillv. art.nr:
- TLE4999C4S0001HALA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Supply Voltage | 20 V | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Supply Voltage 20 V | ||
The Infineon TLE series is a Dual channel linear Hall sensor with a bus-capable digital Short-PWM-code interface. Both channels are integrated on one die in the chip. The sensor is developed in compliance to ISO 26262. Highest accuracy over a wide temperature range and lifetime is achieved by an integrated digital temperature- and stress-compensation.
Two highly accurate redundant hall measurement channels integrated on one chip
Operating automotive temperature range -40°C to 150°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
2 x 16 bit user-configurable ID in EEPROM
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Multipoint calibration up to 9 points
Operating automotive temperature range -40°C to 150°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
2 x 16 bit user-configurable ID in EEPROM
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Multipoint calibration up to 9 points
