A1126LLHLT-T Allegro Microsystems,, Omnipolar Hall Effect Sensor, 3-Pin SOT-23

Lagstiftning och ursprungsland
COO (Country of Origin): PH

A1126 Chopper Stabilised Omnipolar Hall Effect Sensor Switches, Allegro Microsystems

The Allegro Microsystems A1126 is an omnipolar, ultrasensitive Hall-effect switch with a digital output. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output.

This device has an integrated regulator permitting operation to 24 V.

They are suitable for operation through extended temperature ranges from -40°C to 150°C.
Activation the A1126 with either a north or a south polarity and without a magnetic field, the output is off. This magnetic polarity independence makes it an excellent replacement for reed switches. It also simplifies manufacturing as it does not require the magnets to be orientated.

The A1126 is rated for operation between the ambient temperatures –40°C to 150°C.

AEC-Q100 automotive qualified
Omnipolar operation
High speed, 4-phase chopper stabilisation
Low switchpoint drift
Superior temperature stability
Insensitive to physical stress
Reverse-battery protection
Robust EMC capability
Robust ESD

Hall Effect Sensors, Allegro MicroSystems

Attribute Value
Magnetic Type Omnipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point -50 Gs
Maximum Magnetic Sensor Operating Point 55 Gs
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 24 V
Length 2.98mm
Width 1.91mm
Height 0.95mm
Dimensions 2.98 x 1.91 x 0.95mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SOT-23
Typical Magnetic Sensor Hysteresis 5 30 Gs
215 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 5)
14,60 kr
(exkl. moms)
18,25 kr
(inkl. moms)
Per unit
Per Pack*
5 - 20
14,60 kr
73,00 kr
25 - 45
10,236 kr
51,18 kr
50 - 120
8,81 kr
44,05 kr
125 - 245
8,004 kr
40,02 kr
250 +
7,61 kr
38,05 kr
Related Products
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
Allegro’s diverse selection of speed sensor ICs provide ...
Allegro’s diverse selection of speed sensor ICs provide optimized solutions for many non-automotive applications where speed or speed and direction information are needed. These sensor ICs can handle designs using various target geometries, materials, and sensing orientations. Allegro’s portfolio of ...
Omnipolar detection Hall ICs can detect both S-and ...
Omnipolar detection Hall ICs can detect both S-and N-pole magnetic fields, simplifying magnet management. Omnipolar detectionMicropower operation (small current using intermittent operation method)Ultra-compact CSP4 packageFor 1.8V Power supply voltageLow sensitivity (BOP TYP +/-6.3mT)High ESD resistance ...
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...