Microchip TC4427ACOA713 MOSFET Gate Driver, 1.5 A 8-Pin 4.5 V, SOIC

Mängdrabatt möjlig

Antal (1 förpackning med 5 enheter)*

54,30 kr

(exkl. moms)

67,90 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Begränsat lager
  • 4 085 kvar, redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
5 - 4510,86 kr54,30 kr
50 - 959,016 kr45,08 kr
100 - 2458,082 kr40,41 kr
250 - 9957,94 kr39,70 kr
1000 +7,778 kr38,89 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
238-0670
Tillv. art.nr:
TC4427ACOA713
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Product Type

MOSFET

Output Current

1.5A

Pin Count

8

Fall Time

30ns

Package Type

SOIC

Driver Type

MOSFET

Minimum Supply Voltage

4.5V

Maximum Supply Voltage

4.5V

Standards/Approvals

No

Automotive Standard

No

The Microchip dual high-speed power MOSFET driver are improved versions of the earlier TC4426/TC4427/TC4428 family of MOSFET drivers. In addition to matched rise and fall times, the TC4426A/TC4427A/TC4428A devices have matched leading and falling edge propagation delay times. These devices are highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking occurs on the Ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 2 kV. The TC4426A/TC4427A/TC4428A MOSFET drivers can easily charge/discharge 1000 pF gate capacitances in under 30 ns. These devices provide low enough impedances in both the On and Off states to ensure the MOSFET’s intended state will not be affected, even by large transients.

High Peak output current 1.5A

Supply voltage operating range - 4.5V to 18V

High capacitive load drive capability 1000 pF in 25ns

Short delay times 30 ns

Latch-up protected

Can withstand 0.5A reverse current

Input withstands negative inputs up to 5V

Electrostatic Discharge (ESD) protected 2 kV

relaterade länkar