Infineon MOSFET Gate Driver 4, 1.5 A 36-Pin 5.5 V, DSO
- RS-artikelnummer:
- 233-4398
- Tillv. art.nr:
- TLE92464EDXUMA1
- Tillverkare / varumärke:
- Infineon
Antal (1 rulle med 1000 enheter)*
55 373,00 kr
(exkl. moms)
69 216,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 27 juli 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 1000 + | 55,373 kr | 55 373,00 kr |
*vägledande pris
- RS-artikelnummer:
- 233-4398
- Tillv. art.nr:
- TLE92464EDXUMA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Solenoid Driver | |
| Output Current | 1.5A | |
| Pin Count | 36 | |
| Package Type | DSO | |
| Number of Outputs | 4 | |
| Driver Type | MOSFET | |
| Minimum Supply Voltage | 4.5V | |
| Number of Drivers | 4 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Width | 7.6 mm | |
| Height | 2.5mm | |
| Length | 10.3mm | |
| Mount Type | Surface | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Solenoid Driver | ||
Output Current 1.5A | ||
Pin Count 36 | ||
Package Type DSO | ||
Number of Outputs 4 | ||
Driver Type MOSFET | ||
Minimum Supply Voltage 4.5V | ||
Number of Drivers 4 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Width 7.6 mm | ||
Height 2.5mm | ||
Length 10.3mm | ||
Mount Type Surface | ||
Automotive Standard AEC-Q100 | ||
The Infineon TLE92464ED is a flexible, monolithic solenoid driver IC designed for the control of linear solenoids in automatic transmissions, electronic stability control and active suspension applications. The device includes the drive transistor and the current sensing resistor to minimize the number of external components. The device control the load current with less than 1% error. It target current from 0 to 1500mA can be programmed with a resolution of 15 bit. The device supports dither currents up to 1800mA. The dither generator superimposes a triangular or trapezoidal waveform with programmable amplitude, frequency and shape on the programmed current set point. A 32 bit SPI interface is used to control the 4 channels and monitor the status of the diagnostic functions. The SPI communication is secured with an 8 bit CRC and a programmable timeout watchdog.
Two independent current feedback paths
Integrated system clock with clock watchdog
Temperature range -40°C to 175 °C
Excellent immunity to large load supply voltage changes