Huco Friction Clutch, 6mm Bore 53Ncm
- RS-artikelnummer:
- 890-3033
- Tillv. art.nr:
- 273P25.2222.RS
- Tillverkare / varumärke:
- Huco
Mängdrabatt möjlig
Antal (1 enhet)*
653,05 kr
(exkl. moms)
816,31 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 3 enhet(er) är redo att levereras
- Plus 4 enhet(er) är redo att levereras från en annan plats
- Dessutom levereras 53 enhet(er) från den 18 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 653,05 kr |
| 5 - 9 | 627,09 kr |
| 10 + | 613,87 kr |
*vägledande pris
- RS-artikelnummer:
- 890-3033
- Tillv. art.nr:
- 273P25.2222.RS
- Tillverkare / varumärke:
- Huco
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Huco | |
| Bore | 6mm | |
| Torque Rating | 53Ncm | |
| Body Diameter | 25.8mm | |
| Välj alla | ||
|---|---|---|
Brand Huco | ||
Bore 6mm | ||
Torque Rating 53Ncm | ||
Body Diameter 25.8mm | ||
- COO (Country of Origin):
- GB
2 Plate Adjustable Friction Clutches with Sleeve Adaptor, Set Screw and Clamp Fixings
Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
Features and Benefits
• Compact proportions
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
Product Application Information
As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
