Huco Friction Clutch, 8mm Bore 53Ncm
- RS-artikelnummer:
- 890-3020
- Tillv. art.nr:
- 267P25.2828.RS
- Tillverkare / varumärke:
- Huco
Mängdrabatt möjlig
Antal (1 enhet)*
796,56 kr
(exkl. moms)
995,70 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 7 enhet(er) är redo att levereras
- Plus 2 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 796,56 kr |
| 5 - 9 | 764,85 kr |
| 10 + | 748,83 kr |
*vägledande pris
- RS-artikelnummer:
- 890-3020
- Tillv. art.nr:
- 267P25.2828.RS
- Tillverkare / varumärke:
- Huco
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Huco | |
| Bore | 8mm | |
| Torque Rating | 53Ncm | |
| Body Diameter | 25.8mm | |
| Välj alla | ||
|---|---|---|
Brand Huco | ||
Bore 8mm | ||
Torque Rating 53Ncm | ||
Body Diameter 25.8mm | ||
- COO (Country of Origin):
- GB
2 Plate Adjustable Friction Clutches with Clamp Oldham Coupler, Set Screw & Clamp Fixings
Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
Features and Benefits
"• Compact proportions
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device"
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device"
Product Application Information
As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
