Trenz Electronic GmbH TE0711-01-100-2C High IO Xilinx Artix-7 100T Module with speedgrade 2C and USB TE0711-01 for

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

Trenz Electronic GmbH Programmable Logic Development Kits

The Trenz electronic is an FPGA module integrating a Xilinx Artix-7 100T FPGA, 32Mb Quad SPI flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large number of configurable I/Os. All this on a tiny footprint, smaller than a credit card. It has an electric rating of either 3.3V or 3.3V and 5V. It is used for industrial applications.

Features and Benefits:

• 100MHz MEMS oscillator
• AES bit-stream encryption
• Dual 100MBit Ethernet
• eFUSE bit-stream encryption
• Evenly spread supply pins for good signal integrity
• It has 200MHz speed
• Lead free
• MAC address EEPROM
• on-board high efficiency DC-DC converters
• Operating temperature ranges between 0°C and 70°C
• Plug-on module with two 100-pin hermaphroditic stacking strips
• Rugged for shock and high vibration
• Single-ended FPGA I/O pins available on B2B strips Up to 112
• System management and power sequencing

Certifications:

• WEEE

Specifikationer
Attribute Value
Classification Module
Programmable Logic Technology CPLD, FPGA
Kit Classification Module
Technology CPLD, FPGA
For Use With Modules in 4 x 5 cm Form Factors
Featured Device TE0711-01
Kit Name High IO Xilinx Artix-7 100T Module with speedgrade 2C and USB
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 782,51 kr
(exkl. moms)
2 228,14 kr
(inkl. moms)
Enheter
Per unit
1 - 4
1 782,51 kr
5 - 9
1 734,43 kr
10 - 24
1 688,83 kr
25 - 49
1 645,40 kr
50 +
1 604,25 kr
Related Products
The easy Radio Intelligent Controller (eRIC4) radio transceiver ...
Description:
The easy Radio Intelligent Controller (eRIC4) radio transceiver module is based on a Texas Instruments CC430 System-on-Chip (SoC) device. THe processor Flash memory is programmed with a protected version of easyRadio Operating System (eROS) which provides the user with high-level ...
The MCP2200 Breakout Module allows for the evaluation ...
Description:
The MCP2200 Breakout Module allows for the evaluation and development of the MCP2200 serial converter. Dual In-Line Package (DIP) Form Factor BoardUART Tx and Rx signalsUART RTS and CTS signals8 General Purpose (GP) linesUser selectable power supply of 3.3 V ...
The SPWF01SA and the SPWF01SC series of intelligent ...
Description:
The SPWF01SA and the SPWF01SC series of intelligent Wi-Fi modules embodies an affordable solution to plug and play and standalone 802.11 b/g/n devices, which enables easy integration of wireless Internet and IoT connectivity features into existing or new products.The Modules ...
The ConnectEVE board contains a FT800Q EVE graphic ...
Description:
The ConnectEVE board contains a FT800Q EVE graphic controller and 4.3in TFT colour display panel. The board is designed to be used as an additional display on MikroElektronika Easy development boards. AT043B35 LCD with 480 x 272 pixel resolution driven ...