Cynergy3, 2 L/min Flow Controller, Cable, Relay

  • RS-artikelnummer 257-076
  • Tillv. art.nr FS15A
  • Tillverkare / varumärke Cynergy3
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer
//media.rs-online.com/t_line/LF338982-10.gif

Cynergy3 Flow Detection Switch

The Cynergy3 flow detection switch has a maximum flow rate of 2L/min designed for use in liquid flow systems at pressures up to 10bar and temperatures up to 85°C. Its design is based around a moving magnet and a fixed reed switch with a low flow restriction. This switch is designed to be used in liquids only and should not be used in systems with significant amounts of solid particles. This flow switch can be mounted horizontally or vertically and has minimal flow restriction. It is ideally used in water but can be used in weak acidic liquids.
Note:
Not to be used in any chlorinated liquids.

Features and Benefits

15mm and 22mm tube versions
Low flow version available in a 15mm tube
Release flow rate is 0.3L/min
Use in cold and hot water up to 85°C
Mainly for use with hot or cold water however, they may also be used with a wide range of chemicals
Pressure rating is 150psi maximum
Switching current is 1A DC or AC (rms)
Switching voltage is 240V DC or AC (rms)
Switching power is 15W (15VA) resistive loads

Applications

Flow measurement and dosing control
Industrial use

Certifications

WRAS approved

Specifikationer
Attribute Value
Maximum Flow Rate 2 L/min
Electrical Connection Cable
Control Output Relay
Mounting Style Horizontal or Vertical
Display Screen No
Pipe Diameter Range 15 mm
Maximum Operating Temperature +85°C
39 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
217,49 kr
(exkl. moms)
271,86 kr
(inkl. moms)
Enheter
Per unit
1 +
217,49 kr
Related Products
The ifm electronic airflow sensor/switch can sense a ...
Description:
The ifm electronic airflow sensor/switch can sense a maximum flow rate of 1000cm³/s working on the calorimetric principle. It has a supply voltage rating ranging between 80VAC/DC and 250VAC/DC. The immersion depth into the duct can be flexibly varied via ...
Suitable for flow measurement & ON/OFF control applications ...
Description:
Suitable for flow measurement & ON/OFF control applications with process fluids, pump protection, cooling/heating circuits and lubricationInterfaces via S030 pipework flow adaptor (see stock no. 249-7513 typically)Large LCD display of flow rate with bargraphSimulation function, LED status indicationMulti-language ...
Compact, intelligent sensors featuring MEMS technology for precision ...
Description:
Compact, intelligent sensors featuring MEMS technology for precision mass airflow and LNG measurement. Precision unidirectional mass airflowStable output across full scaleLow power consumptionJoint type: Bamboo with external dia. 7.4mm (min.); 8.6mm (max.) passage diameter 4mm. Except 619-1859 which is an ...
Series S030 in-line flow adaptors incorporating paddlewheel transducer ...
Description:
Series S030 in-line flow adaptors incorporating paddlewheel transducer for use with flow control transmitter SE30 HT. Flow control transmitter for liquid flow measurementSuitable for flow measurement and ON/OFF control in process applicationsSensor unit interfaces via S030 pipework flow adaptor Supply ...