Infineon NOR 256 MB SPI Flash Memory 8-Pin WSON

Antal 1 enhet (levereras på en bricka)*

67,38 kr

(exkl. moms)

84,22 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 338 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +67,38 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
193-8756P
Tillv. art.nr:
S25FL256SAGNFB000
Tillverkare / varumärke:
Infineon
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Infineon

Product Type

Flash Memory

Memory Size

256MB

Interface Type

SPI

Package Type

WSON

Pin Count

8

Organisation

32M x 8 Bit

Mount Type

Surface

Maximum Clock Frequency

133MHz

Cell Type

NOR

Maximum Supply Voltage

3.6V

Minimum Supply Voltage

2.7V

Timing Type

Synchronous

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

105°C

Length

8mm

Height

0.75mm

Width

8 mm

Standards/Approvals

No

Maximum Random Access Time

14.5ns

Number of Bits per Word

8

Series

S25FL256S

Number of Words

32M

Automotive Standard

AEC-Q100

This family of devices connect to a host system via a SPI. Traditional SPI single bit serial input and output (Single I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit (Quad I/O or QIO) serial commands. This multiple width interface is called SPI Multi-I/O or MIO. In addition, the FL-S family adds support for DDR read commands for SIO, DIO and QIO that transfer address and read data on both edges of the clock.The Eclipse architecture features a Page Programming Buffer that allows up to 128 words (256 bytes) or 256 words (512 bytes) to be programmed in one operation, resulting in faster effective programming and erase than prior generation SPI program or erase algorithms. Executing code directly from flash memory is often called Execute-In-Place or XIP. By using FL-S devices at the higher clock rates supported, with QIO or DDR-QIO commands, the instruction read transfer rate can match or exceed traditional parallel interface, asynchronous, NOR flash memories while reducing signal count dramatically.The S25FL128S and S25FL256S products offer high densities coupled with the flexibility and fast performance required by a variety of embedded applications. They are ideal for code shadowing, XIP and data storage.

Relaterade länkar