HellermannTyton Connectivity 2 Port LC Single Mode Fibre Optic Patch Panel With 1 Ports Populated
- RS-artikelnummer:
- 261-5233
- Tillv. art.nr:
- CCPA-M111LP/BK-0
- Tillverkare / varumärke:
- HellermannTyton Connectivity
Antal (1 enhet)*
287,82 kr
(exkl. moms)
359,78 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 19 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 287,82 kr |
*vägledande pris
- RS-artikelnummer:
- 261-5233
- Tillv. art.nr:
- CCPA-M111LP/BK-0
- Tillverkare / varumärke:
- HellermannTyton Connectivity
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | HellermannTyton Connectivity | |
| Connector Type | LC | |
| Number of Ports | 2 | |
| Number of Populated Ports | 1 | |
| Panel Type | Sliding | |
| Single/Multimode | Single Mode | |
| Välj alla | ||
|---|---|---|
Brand HellermannTyton Connectivity | ||
Connector Type LC | ||
Number of Ports 2 | ||
Number of Populated Ports 1 | ||
Panel Type Sliding | ||
Single/Multimode Single Mode | ||
- COO (Country of Origin):
- GB
The HellermannTyton customer connection point (CCP) is manufactured from VO and UV stable black polycarbonate and has a fully detachable snap on lid. The closure has 2 separate cable access points which are sealed with a silicon cable entry kit to maintain the IP68 rating.
IP68 sealing gives a high level of performance to prevent dirt and moisture ingress
Optional vent gauze feature to prevent moisture condensation
3 sealed cable entry points, two at the base and one in the rear of the enclosure
Positive fibre management to enable the use of both G652D or G657 single mode fibre types
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
Optional vent gauze feature to prevent moisture condensation
3 sealed cable entry points, two at the base and one in the rear of the enclosure
Positive fibre management to enable the use of both G652D or G657 single mode fibre types
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
relaterade länkar
- HellermannTyton Connectivity 2 Port LC Single Mode Fibre Optic Patch Panel With 1 Ports Populated
- HellermannTyton Connectivity 2 Port LC Single Mode Fibre Optic Patch Panel With 2 Ports Populated
- HellermannTyton Connectivity 12 Port LC Single Mode Fibre Optic Patch Panel With 12 Ports Populated
- HellermannTyton Connectivity 24 Port LC Single Mode Fibre Optic Patch Panel With 24 Ports Populated
- RS PRO LC Duplex Fibre Optic Patch Panel With 24 Ports Populated, 1U
- Telegartner 6 Port LC Multimode Duplex Fibre Optic Patch Panel With 6 Ports Populated
- HellermannTyton Connectivity 2 Port Single Mode Fibre Optic Patch Panel With 0 Ports Populated
- Phoenix Contact 6 Port LC Multimode Duplex Fibre Optic Patch Panel With 2 Ports Populated
