Microchip ENC28J60-I/ML, Ethernet Controller, 10Mbps MII, MIIM, Serial-SPI, 3.3 V, 28-Pin QFN EP

RS-artikelnummer:: 889-5294
Tillv. art.nr:: ENC28J60-I/ML
Tillverkare / varumärke:: Microchip

Microchip ENC28J60-I/ML, Ethernet Controller, 10Mbps MII, MIIM, Serial-SPI, 3.3 V, 28-Pin QFN EP

Antal (1 rör med 61 enheter)*

2 393,884 kr

(exkl. moms)

2 992,355 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

61 enhet(er) är redo att levereras

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet	Per Rør*
61 +	39,244 kr	2 393,88 kr

*vägledande pris

RS-artikelnummer:: 889-5294
Tillv. art.nr:: ENC28J60-I/ML
Tillverkare / varumärke:: Microchip

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Microchip
	Physical Network Type	10BaseT
	Host Interface	Serial-SPI
	Network Interface	MII, MIIM
	IC Type	Controller IC
	Communication Mode	Full Duplex, Half Duplex
	Data Rate	10Mbps
	Standard Supported	IEEE 802.3
	Mounting Type	Surface Mount
	Package Type	QFN EP
	Pin Count	28
	DMA Support	Yes
	Typical Operating Supply Voltage	3.3 V
	Dimensions	6 x 6 x 0.88mm
	Maximum Operating Temperature	+85 °C
	Minimum Operating Temperature	-40 °C

	Välj alla
	Brand Microchip
	Physical Network Type 10BaseT
	Host Interface Serial-SPI
	Network Interface MII, MIIM
	IC Type Controller IC
	Communication Mode Full Duplex, Half Duplex
	Data Rate 10Mbps
	Standard Supported IEEE 802.3
	Mounting Type Surface Mount
	Package Type QFN EP
	Pin Count 28
	DMA Support Yes
	Typical Operating Supply Voltage 3.3 V
	Dimensions 6 x 6 x 0.88mm
	Maximum Operating Temperature +85 °C
	Minimum Operating Temperature -40 °C

ECN28J60 10Base-T Ethernet Controllers

The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.

Features and Benefits:

10BASE-T

Integrated MAC and PHY

10Mbps bandwidth

IEEE 802.3 compatible

SPI interface with clock speeds up to 25Mhz

Supports MAC Unicast, Multicast and Broadcast packets

PHY loopback mode and programmable outputs

Applications:

Security

Instrumentation

Home control

Building automation

Industrial automation

VoIP

PHY and MAC?

PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.

MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.

Daughter boards

AC164121 – 667-7899

AC164123 – 667-7902

Ethernet Communications - Microchip