Microchip KSZ8081MLXIA-TR, Ethernet Transceiver, 3.3 V 100 Mbps, 48-Pin 3.3 V LQFP
- RS-artikelnummer:
- 235-4637
- Tillv. art.nr:
- KSZ8081MLXIA-TR
- Tillverkare / varumärke:
- Microchip
Antal (1 rulle med 1000 enheter)*
19 227,00 kr
(exkl. moms)
24 034,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 16 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 1000 + | 19,227 kr | 19 227,00 kr |
*vägledande pris
- RS-artikelnummer:
- 235-4637
- Tillv. art.nr:
- KSZ8081MLXIA-TR
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Transceiver | |
| Sub Type | Transceiver | |
| Standard Supported | IEEE 802.3 | |
| Package Type | LQFP | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Length | 7.1mm | |
| Width | 7.1 mm | |
| Standards/Approvals | No | |
| Height | 1.6mm | |
| Minimum Supply Voltage | 3.3V | |
| Automotive Standard | No | |
| Supply Current | 47mA | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Transceiver | ||
Sub Type Transceiver | ||
Standard Supported IEEE 802.3 | ||
Package Type LQFP | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Length 7.1mm | ||
Width 7.1 mm | ||
Standards/Approvals No | ||
Height 1.6mm | ||
Minimum Supply Voltage 3.3V | ||
Automotive Standard No | ||
Supply Current 47mA | ||
The Microchip KSZ8081 series is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O Interface support.
Single-chip 10BASE-T/100BASE-TX IEEE 802.3 compliant Ethernet transceiver
MII Interface support
HBM ESD rating
Built-in 1.2V regulator for core