MH Connectors RJ45 Boot for use with RJ45 Connectors

  • RS-artikelnummer 821-2955
  • Tillv. art.nr MHRJ45SRB-RET-G
  • Tillverkare / varumärke MH Connectors
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

MH Connectors RJ45 8P Hoods and Boots

A range of Strain Relief Hoods and Boots for use with RJ45 8P Plugs in a variety of colours:
821-2958 RJ45 Retrofit Hood Blue
821-2951 RJ45 Retrofit Hood Yellow
821-2955 RJ45 Retrofit Hood Green
821-2964 RJ45 Retrofit Hood Red
111-8775 RJ45 Retrofit Hood Dark Grey
111-8776 RJ45 Retrofit Hood Orange
111-8777 RJ45 Retrofit Hood Purple
111-8778 RJ45 Retrofit Hood Pink
111-8779 RJ45 Retrofit Hood White
821-2967 RJ45 Strain Relief Boot - Light Grey
821-2961 RJ45 Strain Relief Boot - Blue
821-2970 RJ45 Strain Relief Boot - Yellow
821-2973 RJ45 Strain Relief Boot - Green
821-2977 RJ45 Strain Relief Boot - Black
821-2986 RJ45 Strain Relief Boot - Red
111-8426 RJ45 Strain Relief Boot - Dark Grey
111-8463 RJ45 Strain Relief Boot - Orange
111-8773 RJ45 Strain Relief Boot - Purple
111-8774 RJ45 Strain Relief Boot - Pink
111-8780 RJ45 Strain Relief Boot - White
The Retrofit Hoods allow for Field colour coding of RJ45 Modular Plugs.
The Strain Relief Boots are suitable for cables up to 6.0 mm outside diameter and are applied before crimping. After crimping the Insert locks into the Modular Plug.

Specifikationer
Attribute Value
Accessory Type RJ45 Boot
Interface Type RJ45
For Use With RJ45 Connectors
300 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 5)
2,282 kr
(exkl. moms)
2,852 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
5 - 120
2,282 kr
11,41 kr
125 - 245
1,568 kr
7,84 kr
250 - 495
1,488 kr
7,44 kr
500 - 995
1,39 kr
6,95 kr
1000 +
1,29 kr
6,45 kr
Related Products
Free plugs (15.0mm dia.) which mate with panel ...
Description:
Free plugs (15.0mm dia.) which mate with panel mount sockets all incorporating PEEK insulating material. Terminations are by solder bucket.,The free plugs are supplied with collets to take a maximum cable diameter of 9mm. Smaller collets are available separately. For ...
A series of Phoenix Contact mounting frames, perfect ...
Description:
A series of Phoenix Contact mounting frames, perfect in situations where push-pull interlocking is required. Each frame is a RJ45 connection and will sit perfectly in square or rectangular mounting cut-out depending on the frame itself. All models are highly ...
A range of white plastic commercial grade blanking ...
Description:
A range of white plastic commercial grade blanking plates for use with the NETCONNECT° faceplates and SL series faceplates. The flush blanking plates come in single and quarter module sizes allowing any unused modules to be closed off.
Snap together hoods offering protection and a 'snag ...
Description:
Snap together hoods offering protection and a 'snag free' lever. Can be fitted during assembly or used as a convenient retro-fit coverAvailable in 7 different colours to assist cable identification.