Siemens Signum, Red, Twist to Reset 22mm Mushroom Head Emergency Button

  • RS-artikelnummer 743-0004
  • Tillv. art.nr 3SB3500-1AA20
  • Tillverkare / varumärke Siemens
Datablad
Lagstiftning och ursprungsland
Uppfyller ej
COO (Country of Origin): DE
Produktdetaljer

Emergency Stop Pushbuttons

This unique portfolio of Siemens 3SB3 series is a modular range of commanding and signalling devices for front plate mounting and rear conductor connection.
The 3SB3 series are round and have a mounting diameter of 22 mm and their actuator is supplied with a holder.
Complete units are offered, but only for the most commonly used applications.
This amazing range has the following standards:
•IEC 60947-1, EN 60947-1, IEC 60947-5-1, EN 60947-5-1, IEC 60947-5-5, EN 60947-5-5 for EMERGENCY-STOP mushroom pushbuttons

Connection methods

These units are available with screw terminals (box terminals), spring-type terminals or solder pins.

The 3SB3 series is made of:

•molded plastic in flat, wound and square design •metal in round design

They can be mounted by a single person and are climate-proof (KTW 24) to suit industrial applications.
Their main purpose of existence is to act as safety emergency-stop pushbuttons and their switching frequency is approximately 1000 operating cycles.

The outer diameter of the actuating element of 3SB3500-1AA20 is 60 mm.
This is a typical emergency off/stop function device with the vibration resistance, according to IEC 60068-2-6, which is 20 ... 200 Hz: 5g.
The mechanical service life has been designed to be used up to 300000 cycles.
The ambient temperature during operation ranging from -25°C to +70°C, during storage however ranging from -40°C to +80°C.
The Emergency Stop Mushroom Pushbuttons represents worldwide standards, in particular:
•IP67 where a device can withstand immersion in one meter of water for 30 minutes

Frequently asked questions & answers

What is the different between a push button switch for an emergency stop and a general-purpose push button switch? A general-purpose push button switch is used for controls, e.g. to start machine operation or simply to switch modes. An emergency stop push button switch however, is mainly used as a safety measure to stop hazardous events.

PHASE OUT NOTIFICATION

This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the alternative range suggested by the manufacturer: SIRIUS ACT (3SU1). Please refer to the SIRIUS 3SB3 to ACT Cross-Reference guide located in the Technical Reference section.

Specifikationer
Attribute Value
Mounting Type Panel Mount
Reset Method Twist to Reset
Cutout Diameter 16mm
IP Rating IP67
Head Style Mushroom
Illuminated No
Range Signum
Head Diameter 22mm
Push Button Material Plastic
Colour Red
Series 3SB35
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
296,00 kr
(exkl. moms)
370,00 kr
(inkl. moms)
Enheter
Per unit
1 - 4
296,00 kr
5 - 9
286,97 kr
10 +
277,72 kr
Nästa dag-leverans inte möjlig
Related Products
This range of emergency stop control station units ...
Description:
This range of emergency stop control station units from the Eaton RMQ Titan 22mm series is designed to simplify the process of buying individual components. These units comprise of the emergency stop push button actuator, control station enclosure, fixing collar ...
An emergency stop switch with exclusive “built-in-safety” design. ...
Description:
An emergency stop switch with exclusive “built-in-safety” design. Certified to the highest safety standards: UL 508, CSA 22.2, EN 60947-5-5 and EN 60547-5-1. For dia. 22 mm panel cut-out. Easy to mount and operate. Illuminated version available. High security: no ...
IDEC's innovative "safe break action" ensures all NC ...
Description:
IDEC's innovative "safe break action" ensures all NC contacts open if the contact block is separated from the operatorPushlock turn reset and push-pull functions built into same unitDirect opening action mechanismSafety lock mechanism Solder or PCB terminal options40mm button size. ...
Modular construction illuminated and non illuminated Pushbutton, Keylock, ...
Description:
Modular construction illuminated and non illuminated Pushbutton, Keylock, Rotary and Emergency Stop switches to fit industry standard 16mm diameter cut-outs. Round, square and rectangular operators can be fitted to single, double, three and four pole switch blocks for a variety ...