EA Elektro-Automatik EA-ELR 1000 Series Electronic Load, 0 to 1500 W, 0/80 V, 0 to 60 A

Se alla Electronic Loads

Antal (1 enhet)*

51 271,06 kr

(exkl. moms)

64 088,82 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 3 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +51 271,06 kr

*vägledande pris

RS-artikelnummer:
259-2937
Distrelec artikelnummer:
303-59-524
Tillv. art.nr:
EA-ELR 10080-60 2U
Tillverkare / varumärke:
EA Elektro-Automatik
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

EA Elektro-Automatik

Series

EA-ELR 1000

Product Type

Electronic Load

Load Type

Electronic Load Regenerative

Constant Voltage Mode Range

0/80 V

Constant Current Mode Range

0 to 60 A

Constant Resistance Mode Range

0.04 to 80 Ω

Constant Wattage Mode Range

0 to 1500 W

Interface Type

EtherCAT, USB, RS232, Ethernet, CAN

Efficiency

94%

Rack Unit

2U

Operating Modes

Constant Resistance, Constant Current, Constant Voltage, Constant Power

Standards/Approvals

EN 610101 IEC 610101 UL 610101 CSA C22.2 No 610101 BS EN 610101

COO (Country of Origin):
DE
The EA Elektro-Automatik high-end most versatile programmable electronic load based upon a high-performance FPGA controller unit with up to 16-bit resolution. It operates as DC electronic load and it features the superior flexible auto-ranging input (e-load)for a usage at either high voltage or high current as required within the nominal power rating. It is regenerative means the DC energy extracted from an EUT is converted into commercial AC supply with a 95% efficiency and returned back into the grid (no excess dissipative heats compared to conventional dissipative loads). The series include an intuitive 5 colour TFT touch panel with up to 5-digit resolution, allowing to see the set- and read back values in one view and giving access to the integrated functions such as function generator, fuel cell and battery-simulation(R-mode). For external control, this series comes standard with USB, Ethernet and analogue interface (0-5/0-10V).

Operates as DC load

Auto-ranging DC-input

Constant U, I, P and R mode

Regenerative in DC load mode, with up to 95% efficiency

FPGA controlled, with up to 16 bit resolution

For demanding laboratory application, R&D

Function generator, battery, fuel cell-simulation

Sensitive 5 TFT touch display of up to 5 digits

USB/Ethernet/Analog 0-5V/0-10V on board, plug in play slot for retrofitting more interface options

Hard wire connection, DC output safety terminals

A plug’n play slot is provided as well, to retrofit further available optional interface such as CAN, Ether CAT, Profibus, Profinet. This series is a perfect instrument for device- and component testing in modern R&D environment, suitable for 19 integration and bench usage.

relaterade länkar