Phoenix Contact RIF-1-RSC-LDP-24DC/2X21/FG Series Interface Relay, DIN Rail Mount, 24V dc Coil, DPDT, 2-Pole

Se kategorien
För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.
RS-artikelnummer:
175-0524
Tillv. art.nr:
2909848
Tillverkare / varumärke:
Phoenix Contact
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Phoenix Contact

Coil Voltage

24V dc

Contact Configuration

DPDT

Mounting Type

DIN Rail

Series

RIF-1-RSC-LDP-24DC/2X21/FG

Number of Poles

2

Maximum Input Voltage

24V dc

Terminal Type

Screw

Switching Voltage

250V ac/dc

Depth

75mm

Height

89mm

Length

16mm

Contact Material

Silver Alloy

Input Current

30mA

Dimensions

16 x 75 x 89mm

Maximum Operating Temperature

+50°C

Operating Temperature Range

-20 → +50°C

Life

10^7 (Mechanical) cycles

Special Features

IP20 Relay Base, Safe Isolation

Standards Met

DIN EN 50178/VDE 0160, EN 50205, UL 94

Relay Switching Classification

Pre-Assembled Relay Module

Minimum Operating Temperature

-20°C

COO (Country of Origin):
CN

Phoenix Contact RIF-1-RSC


This time relay RIF-1-RSC-LDP-24DC/2X21/FG 2909848 from Phoenix Contact is the cost-effective alternative to a PLC

with easy configuration and fast wiring.

Features and Benefits


  • Pre-assembled relay module

  • Screw connection

  • Consists of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket

  • Contact type: 2 changeover contacts

  • Time-saving potential distribution, thanks to plug-in bridges

  • Protection against operating errors due to manual operation that is lockable via screwdriver

  • Quick and error-free connection to the controller via system cabling

Safety


When working on the products and the system, you must always keep the operating instructions and other items of product documentation to hand and follow them strictly.

Demands on the power supply


Only use power supply units that ensure safe isolation between the primary and secondary circuits according to EN 50178.

Applications


You can use the same electromechanical relay module design for both AC and DC switching module.

  • Electrical isolation

  • Voltage adjustment of frequently varying voltage levels

  • Power amplification

  • Signal multiplication in the case of relay modules with multiple contacts (e.g., for signal confirmations)

Approvals


IECEx, ATEX and Class 1 Zone 2

relaterade länkar