Phoenix Contact RIF-1-RPT-LDP-24DC/1IC Series Interface Relay, DIN Rail Mount, 24V dc Coil, SPST, 1-Pole

Se kategorien

Antal (1 enhet)*

155,54 kr

(exkl. moms)

194,42 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 26 enhet(er) är redo att levereras
  • Plus 19 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +155,54 kr

*vägledande pris

RS-artikelnummer:
171-7039
Tillv. art.nr:
2909884
Tillverkare / varumärke:
Phoenix Contact
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Phoenix Contact

Coil Voltage

24V dc

Contact Configuration

SPST

Mounting Type

DIN Rail

Series

RIF-1-RPT-LDP-24DC/1IC

Number of Poles

1

Maximum Input Voltage

24V dc

Minimum Input Voltage

19.2V

Terminal Type

Screw

Switching Voltage

250V ac/dc

Depth

75mm

Height

93mm

Length

16mm

Contact Material

Silver Alloy

Input Current

18mA

Turn Off Time

10ms

Operating Temperature Range

-40 → +70°C

Relay Type

Solid State Relay

Life

30000000 Cycles

Relay Switching Classification

Interface Relay Module

Turn On Time

8ms

Maximum Operating Temperature

+70°C

Input Voltage Range

24V dc

Accessory Type

Relay Module

Dimensions

16 x 75 x 93mm

Minimum Operating Temperature

-40°C

Special Features

IP20 Degree of Protection

COO (Country of Origin):
CN

Phoenix Contact Interface Relay Module, Screw Terminal, SPDT - RIF-1-RPT-LDP-24DC/1IC - 2909884


Safely couple signals between a PLC (programmable logic controller) and peripherals with this relay from Phoenix Contact. The unit is supplied ready for DIN mounting and includes a base, plug-in interference suppression module and retaining bracket for simple setup.
The relay module accepts both solid and flexible conductors over a wide cross-section range. Its cabling system makes it easy to configure and wire, so connection to your control system can be done quickly. Thanks to reverse polarity protection, it won't be damaged if its outlet is wired incorrectly.
This component has a narrow profile to allow for maximum packing capacity on a circuit board. It's conveniently sealed, which makes it washable. This means you can remove welding flux residue without worrying about solvents affecting the relay's function.

Features and Benefits


• Coil voltage of 24 V AC/DC
• Switching current of 100 mA
• Switching voltage of 250 V AC/DC
• SNPO (single pole, normally open) contact configuration
• Silver alloy contact material
• Life of 30,000,000 cycles
• 1 pole
• Screw terminal type
• IP20 (ingress protection) rating for protection against solid objects up to 12 mm
• Dimensions of 16 (length) x 93 (height) x 75 mm (depth)
• Operating temperature range of -40°C to +70°C

relaterade länkar