Senaste sökningar

    Siemens SITOP PSU100S Switch Mode DIN Rail Power Supply 85 → 132V ac Input, 24V dc Output, 5A 144W

    RS-artikelnummer:
    776-7725
    Tillv. art.nr:
    6EP1333-2BA20
    Tillverkare / varumärke:
    Siemens
    Siemens
    Se alla DIN Rail Power Supplies
    Tillfälligt slut i lager restorder för leverans 2022-09-19
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    1 333,00 kr

    (exkl. moms)

    1 666,25 kr

    (inkl. moms)

    EnheterPer unit
    1 +1 333,00 kr

    Alternatives

    Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar dessa produkter istället.

    PULS DIMENSION Q Switch Mode DIN Rail Power Supply 100 → 240V ac Input, 24V dc Output, 5A 120W
    RS-artikelnummer
    514-5552

    Pris (ex. moms) Each

    2 089,18 kr

    (exkl. moms)

    2 611,48 kr

    (inkl. moms)

    PULS DIMENSION C-Line Switch Mode DIN Rail Power Supply 100 → 120V ac Input, 24V dc Output, 5A 120W
    RS-artikelnummer
    627-6174

    Pris (ex. moms) Each

    1 397,04 kr

    (exkl. moms)

    1 746,30 kr

    (inkl. moms)

    Chinfa DRAN120 Switch Mode DIN Rail Power Supply 90 → 264V ac Input, 24V dc Output, 5A 120W
    RS-artikelnummer
    789-4001

    Pris (ex. moms) Each

    1 057,92 kr

    (exkl. moms)

    1 322,40 kr

    (inkl. moms)

    Siemens SITOP PSU6200 Switch Mode DIN Rail Power Supply 85 → 264V ac Input, 24V dc Output, 5A 120W
    RS-artikelnummer
    183-3606

    Pris (ex. moms) Each

    1 343,66 kr

    (exkl. moms)

    1 679,58 kr

    (inkl. moms)

    RS-artikelnummer:
    776-7725
    Tillv. art.nr:
    6EP1333-2BA20
    Tillverkare / varumärke:
    Siemens
    COO (Country of Origin):
    AT

    Lagstiftning och ursprungsland

    COO (Country of Origin):
    AT

    Produktdetaljer

    SITOP Smart Power Supply Units


    The 1 and 3 phase SITOP smart is the universal and powerful standard power supply for machinery and plant engineering. Despite their compact design, they offer an excellent overload response. Thanks to a power boost of 150%, loads with high power consumption can be connected without any problems. The permanent overload capability of 120% offers power reserves in-case of expansions. The high degree of efficiency results in low energy consumption and minimal heat generation inside the control cabinet.
    To increase the 24 V availability, the SITOP smart power supply can be combined with buffer, DC UPS, redundancy and selectivity modules.


    Features and Benefits


    • Compact design
    • Extra power with 1.5 times the rated current for brief functional overload

    • Permanent overload capability with 1.2 times the rated current up to 45°C (24 V versions)

    • High degree of efficiency up to 91.5%

    • Adjustable output voltage for compensating voltage drops

    • Signalling contact for easy integration in the plant monitoring system

    • Wide temperature range from -25°C or -10°C to 70°C


    Product Application Information


    SITOP power supplies can be combined with buffer modules, uninterrupted power supplies, redundancy modules and selectivity modules.


    Why use a DIN Rail power supply?


    The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
    DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.


    Points to consider when buying a DIN Rail power supply


    • DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.

    • Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.

    • Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.

    • Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross-sectional area to help minimise noise and heat.

    • Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.

    • Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.

    • Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.


    Approvals

    cULus
    cCSAus
    ATEX
    IECEx
    GL

    Siemens DIN Rail Power Supply, Switch Mode, 144W Power Rating - SITOP PSU100S Series - 6EP1333-2BA20


    Snap this single-phase switch mode power supply from Siemens onto your DIN rail to provide the voltage and frequency your machinery needs. Its compact dimensions of 50 (W) x 120 (D) x 125mm (H) make it ideal for building systems in tight spaces. Ripple and noise of 150 mV Pk-Pk ensure minimal wastage, which saves on power consumption and minimises heat inside the cabinet. Load regulation of 1% means the voltage will change by a maximum of 1% over the supply's load current range, while line regulation of 0.1% means the device delivers optimal output voltage even with input fluctuations.


    • Mean time between failures of 1,998,441h means it offers a long service life
    • Wide operating temperature range of -25°C to +70°C to withstand harsh environments
    • Safe option for use in explosive atmospheres


    When should I choose a single-phase power supply?


    Single-phase power supplies are suitable for use in low-power applications, in which they are more efficient than 3-phase alternatives.



    Specifikationer

    AttributeValue
    AC or DC Input Voltageac
    AC or DC Output Voltagedc
    Input Voltage85 → 132V ac
    Output Voltage24V dc
    Output Current5A
    Power Rating144W
    Number of Outputs1
    Electrical Phase1
    TypeSwitch Mode
    Height125mm
    Standards MetcCSAus (CSA C22.2 No. 60950-1, UL 60950-1), CE Certified, cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259, EN 55022 Class B, EN 61000-3-2, EN 61000-6-2
    Hazardous Area CertificationIECEx
    Depth120mm
    Width50mm
    Mounting TypeDIN Rail Mount
    Output Voltage Adjustment Range22.8 → 28V
    SeriesSITOP PSU100S
    Ripple And Noise150mV Pk-Pk
    Minimum Temperature-25°C
    Efficiency88%
    Maximum Temperature+70°C
    Load Regulation1%
    MTBF1998441h
    Tillfälligt slut i lager restorder för leverans 2022-09-19
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    1 333,00 kr

    (exkl. moms)

    1 666,25 kr

    (inkl. moms)

    EnheterPer unit
    1 +1 333,00 kr

    Alternatives

    Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar dessa produkter istället.

    PULS DIMENSION Q Switch Mode DIN Rail Power Supply 100 → 240V ac Input, 24V dc Output, 5A 120W
    RS-artikelnummer
    514-5552

    Pris (ex. moms) Each

    2 089,18 kr

    (exkl. moms)

    2 611,48 kr

    (inkl. moms)

    PULS DIMENSION C-Line Switch Mode DIN Rail Power Supply 100 → 120V ac Input, 24V dc Output, 5A 120W
    RS-artikelnummer
    627-6174

    Pris (ex. moms) Each

    1 397,04 kr

    (exkl. moms)

    1 746,30 kr

    (inkl. moms)

    Chinfa DRAN120 Switch Mode DIN Rail Power Supply 90 → 264V ac Input, 24V dc Output, 5A 120W
    RS-artikelnummer
    789-4001

    Pris (ex. moms) Each

    1 057,92 kr

    (exkl. moms)

    1 322,40 kr

    (inkl. moms)

    Siemens SITOP PSU6200 Switch Mode DIN Rail Power Supply 85 → 264V ac Input, 24V dc Output, 5A 120W
    RS-artikelnummer
    183-3606

    Pris (ex. moms) Each

    1 343,66 kr

    (exkl. moms)

    1 679,58 kr

    (inkl. moms)