Dormer No Die, M18 x 2.5mm Pitch, 1.1/2in od
- RS-artikelnummer:
- 272-9331
- Tillv. art.nr:
- F300M18X1.1/2
- Tillverkare / varumärke:
- Dormer
Antal (1 enhet)*
725,65 kr
(exkl. moms)
907,06 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 1 enhet(er) från den 29 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 725,65 kr |
*vägledande pris
- RS-artikelnummer:
- 272-9331
- Tillv. art.nr:
- F300M18X1.1/2
- Tillverkare / varumärke:
- Dormer
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Dormer | |
| Thread Size | M18 | |
| Pitch | 2.5mm | |
| Outside Diameter | 1.1/2in | |
| Thickness | 1/2in | |
| Material | HSS | |
| Left Hand Thread | No | |
| Välj alla | ||
|---|---|---|
Brand Dormer | ||
Thread Size M18 | ||
Pitch 2.5mm | ||
Outside Diameter 1.1/2in | ||
Thickness 1/2in | ||
Material HSS | ||
Left Hand Thread No | ||
RoHS-status: Undantagen
- COO (Country of Origin):
- GB
The Dormer M Adjustable die is a split die to produce external thread by hand in multiple passes with adjusting each pass. By tightening the die stock holder the different classes of thread fit can be achieved such as tight, regular or loose fit. This dies has HSS with bright finish for threading in free machining and plain carbon steel, ferrite stainless steel and grey, malleable, ductile and compacted graphite cast iron. This die is slightly tightened in the holder and it can be used to clean up or produce a partial thread.
BS 1127 1950 Round die standards
High speed steel tool material
Right hand rotation and cutting
Thread form and metric coarse
High speed steel tool material
Right hand rotation and cutting
Thread form and metric coarse