SEGGER 8.06.13 J-Link Measurement+Patch Adapter Adapter

Se kategorien

Antal (1 enhet)*

1 113,19 kr

(exkl. moms)

1 391,49 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 02 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +1 113,19 kr

*vägledande pris

RS-artikelnummer:
201-0719
Tillv. art.nr:
8.06.13 J-Link Measurement+Patch Adapter
Tillverkare / varumärke:
SEGGER
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

SEGGER

Accessory Type

Adapter

Product Type

Development Kit Accessory

Standards/Approvals

No

The SEGGER J-Link Measurement+Patch Adapter provides test points for all debug signals to allow easy access for test probes. It has a standard 20-pin 0.1" socket towards the J-Link debug probe and a standard 20-pin 0.1" header on the target side and can directly be inserted between the J-Link and the debug cable maintaining a 1:1 connection of all debug signals. For increased flexibility VTref on pin 1 and the target supply voltage on pin 19 can be interrupted by means of two jumpers.

Allows easy customized wiring between J-Link and targets that do not provide a standard debug connector that has already been addressed by one of the many available J-Link adapters

The wiring between J-Link and the target is done via coloured jumper wires

Includes:

Measurement Adapter Board

10 Jumper Wires for Manual Setup

relaterade länkar