FTDI Chip USB NMC-2.5M USB to USB Null Modem Cable for use with PC To PC Networking Using USB Port, File Transfer

RS-artikelnummer:: 537-420
Distrelec artikelnummer:: 304-08-729
Tillv. art.nr:: USB NMC-2.5M
Tillverkare / varumärke:: FTDI Chip

FTDI Chip USB NMC-2.5M USB to USB Null Modem Cable for use with PC To PC Networking Using USB Port, File Transfer

Mängdrabatt möjlig

Antal (1 enhet)*

426,14 kr

(exkl. moms)

532,68 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

Dessutom levereras 25 enhet(er) från den 05 januari 2026
Dessutom levereras 10 enhet(er) från den 05 januari 2026
Dessutom levereras 100 enhet(er) från den 25 februari 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet
1 - 9	426,14 kr
10 - 49	415,18 kr
50 +	404,77 kr

*vägledande pris

RS-artikelnummer:: 537-420
Distrelec artikelnummer:: 304-08-729
Tillv. art.nr:: USB NMC-2.5M
Tillverkare / varumärke:: FTDI Chip

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	FTDI Chip
	Product Type	Cable
	Accessory Type	USB to USB Null Modem Cable
	For Use With	PC To PC Networking Using USB Port, File Transfer Between PCs
	Standards/Approvals	FCC and CE
	Distrelec Product Id	30408729

	Välj alla
	Brand FTDI Chip
	Product Type Cable
	Accessory Type USB to USB Null Modem Cable
	For Use With PC To PC Networking Using USB Port, File Transfer Between PCs
	Standards/Approvals FCC and CE
	Distrelec Product Id 30408729

FTDI Chip Null Modem Cable

The FTDI chip null modem cable is a modern replacement for the traditional serial null-modem cable. It allows a user to connect two PCs using their USB ports. The user can then perform file transfers between the PCs via the USB interface. This cable contains a small internal electronic circuit board, encapsulated into the USB connector at both ends of the cable. The electronic is based on the FTDI FT232R USB to serial UART IC and it handles all the USB signalling and protocols. This cable is a USB powered with 2.0 full speed compatible and 2.5m cable that supports data transfer rate up to 3Mbaud at TTL levels.

Features and Benefits

Based on back to back FTDI FT232RQ devices

Entire USB protocol handled by USB connector encapsulated electronics

Lower operating (20mA) and USB suspend mode current (70μA)

Operating temperature ranges between -40°C and 85° C

Support for USB suspend and resume

UHCI/OHCI/EHCI host controller compatible

USB 2.0 full speed compatible

USB Type A connector on both ends of cable

Applications

File transfer between PCs

Password protected file transfer between PCs

PC to PC networking using USB port

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007