Senaste sökningar

    SEGGER J-Link EDU Emulato

    8.08.90 J-Link EDU
    Tillverkare / varumärke:
    Se kategorien
    Denna produkt har utgått
    8.08.90 J-Link EDU
    Tillverkare / varumärke:

    Lagstiftning och ursprungsland


    J-Link EDU

    J-Link EDU is a JTAG programming and debug probe supporting a large number of processor cores. Functionally identical to the J-Link BASE, but with limited support, it's aimed at the Education and Hobbyist market. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.

    Supported Processors

    • ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
    • Microchip PIC32
    • Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N


    • Direct download into Flash memory of most microcontrollers supported
    • Download speed up to 1MB/second
    • Supports concurrent access to CPU by multiple applications
    • GDB Server included: allows using J-Link remotely via TCP/IP
    • Supports multiple target interfaces: JTAG, SWD
    • Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
    • Wide target voltage range: +1.2V to +3.3V, +5V tolerant
    • Supports JTAG chains with multiple devices
    • Embedded Trace Buffer (ETB) support
    • Various target adapters and optical isolation adapters available
    • Powered via USB connector
    • Support for adaptive clocking
    • All JTAG signals can be monitored, target voltage can be measured
    • Target power supply: 300mA with overload protection
    • Target interface: JTAG 20-pin
    • PC interface: USB 2.0
    • Dimensions: 100 x 53 x 27mm
    • Cross-platform support (runs on Windows, Linux, Mac OS X)
    • Supported by all major IDEs
    • Support via the SEGGER on-line forum:

    Target Adapters & Adapter Cables

    131-1325 J-Link Target Power Supply Adapter

    131-1326 J-Link 10-pin Needle Adapter

    131-1327 J-Link RX100/200/600 MCU Adapter

    131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter

    131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter

    131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter

    131-1331 J-Link Microchip PIC32 MCU Adapter

    Link Isolator Boards

    131-1335 J-Link ARM JTAG Isolator Board

    131-1336 J-Link ARM SWD Isolator Board

    131-1337 J-Link USB Isolator Board


    J-Link EDU may only be used for non-commercial purposes.

    Supplied with

    USB cable, 20-pin ribbon cable


    Product TypeProgrammer
    For Use WithFlash microcontrollers
    Kit NameJ-Link EDU Emulato
    Denna produkt har utgått